Tektronix 2246 Operator's Manual page 4

a e s a e e
S e a y
OPERATORS SAFETY SUMMARY
The general safety information in this part of the summary is for both operating and servicing personnel.
Specific warnings and cautions will be found throughout the manual where they apply and do not appear in this
Terms in This Manual
CAUTION statements identify conditions or practices that
could result in damage to the equipment or other property.
WARNING statements identify conditions or practices that
could result in personal injury or loss of life.
CAUTION indicates a personal injury hazard not immedi-
ately accessible as one reads the markings, or a hazard to
property, including the equipment itself.
DANGER indicates a personal injury hazard immediately
accessible as one reads the marking.
Symbols in This Manual
AN
Symbols as Marked on Equipment
tionary or other information is to be found. For
maximum input voltage see Table 1-2.
4 DANGER — High voltage.
® Protective gound (earth) terminal.
ATTENTION — Refer to manual.
LN
This product is intended to operate from a power source
Grounding the Product
Danger Arising from Loss of Ground
Upon loss of the protective-ground connection, ail accessi-
ble conductive parts (including knobs and controls that
may appear to be insulated) can render an electric shock.
Use the Proper Power Cord
Use only the power cord and connector specified for your
product.
Use only a power cord that is in good condition.
For detailed information on power cords and connectors,
see Figure 2-1.
Use the Proper Fuse
To avoid fire hazard, use only a fuse of the correct type,
voltage rating and current rating as specified in the parts
list for your product.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this instrument in an
explosive atmosphere.
To avoid personal injury, do not remove the product cov-
ers or panels. Do not operate the instrument without the
covers and panels properly installed.