AT&T DEFINITY Generic 2 User Manual page 52

Key Words to Know
See feature access code.
access code
activate To begin or turn on the operation of a feature.
The person who handles incoming and outgoing calls at the main
attendant
console.
AUDIX Audio Information Exchange, an optional voice mail and message
service which provides coverage for calls to you by recording callers' messages and
reporting Leave Word Calling messages.
call appearance A button used exclusively to place or receive calls. It has an
assigned extension number and is equipped with a red light and a green status light.
console permission The authorization (from your system manager) to initiate Call
Forwarding All Calls for an extension other than your own.
Automatic redirection of calls from an unanswered voice terminal to
coverage
another voice terminal. Redirection could be to the extension of a receptionist,
secretary, coworker, AUDIX, or message center. A person who provides coverage is
a covering user.
DEFINITY Communications System Generic 2
be connected. (Your voice terminal may be connected to System 85 instead.) Both
DEFINITY Generic 2 and System 85 are communications systems which transmit
and receive voice and data signals for all communications equipment in your
network.
dial pad The 12 pushbuttons you use to dial a number and access features.
display control buttons
and [ Next → → ] . [ ] is used to access the main softkey menu. [
Menu
exit a display feature and return to Normal (call-handling) Mode. [
[ Next → → ] can be used to help you go back and forth through the feature option
screens.
One of the four types of Abbreviated Dialing lists; programmable
enhanced list
only by the system manager. Contains telephone numbers useful to all system
members, and stores each of those numbers as a 1-, 2-, or 3-digit list item.
extension A dialing number of 1 to 5 digits assigned to each voice terminal
connected to your DEFINITY Generic 2 or your System 85.
A special function or service, such as Conference, Hold, Send All Calls, etc.
feature
feature access code A dial code of 1, 2, or 3 digits, which you use to activate or
cancel the operation of a feature. Check with your system manager for the feature
access codes for your system.
group list One of the four types of Abbreviated Dialing lists; programmable by the
controller of the list or the system manager. Contains telephone numbers useful to
members of a specific group, and stores each of those numbers as a 2-digit list item.
handset The handheld part of the voice terminal which you pick up, talk into, and
listen from. Also known as the receiver.
The AT&T switch to which you may
These buttons are labeled [ ] , [ ] , [ ← ← Prev ] ,
Menu Exit
] allows you to
Exit
← ← Prev ] and
RingCentral Ex-1012, p. 52
RingCentral v. Estech
IPR2021-00573
48