AT&T DEFINITY Generic 2 User Manual page 21

To place a call using a
personal, group, or
system list
Dial desired list item number (for example,
4
0 through 9, 01 through 95, and so on, depending on
list size)
5 Dial outside number, extension, or feature access
code you want to store
Note: If your 8410 has a display, you may be able to
use the softkeys to add special functions such as
Pause, Mark, or Wait into the telephone numbers
programmed on the AD button.
Press [ ]
6
Personal List
or Press [ ]
#
Number is stored
Repeat Steps 3 through 6 if you want to program
additional items on the same list
7 Hang up or press [
Drop
If you want to continue programming, begin
again at Step 1 to program another personal list
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this guide;
group and system lists are available from the
controller of the list or from your system manager.
1 Press [ ] or [
Personal List
(while off-hook)
or Dial appropriate Abbreviated Dialing list code
(while off-hook)
Personal
Group
System
2 Dial desired list item (1, 2, 3..., 01, 02...)
Stored number is automatically dialed
[dial tone]
[confirmation tone]
] to end programming
] or [ ]
Group List System List
[dial tone]
[dial tone]
[dial tone]
RingCentral Ex-1012, p. 21
RingCentral v. Estech
IPR2021-00573
17