AT&T DEFINITY Generic 2 User Manual page 15

Using the Display, Softkeys, and
Display Control Buttons
If you are using an 8410 voice terminal equipped with a display, the following
information will help you use the display, the softkeys, and the display control
buttons.
The softkeys are the four keys labeled with arrows ( [
display. The four display control buttons, labeled Menu , Exit , ← ← Prev ,
and Next → → are located under the softkeys. Figure 2 shows the location of the
softkeys in relation to the display above the softkeys and the display control buttons
below them.
Figure 2. The Display, Softkeys, and Display Control Buttons
Entering Softkey Mode and Viewing the Three Feature Option Screens
There are three separate feature option screens. Each of these screens allows you to
select from four different features.
You can enter Softkey Mode by pressing the display option button labeled [
The following is an example of a feature option screen.
The top line of each feature option screen shows you the status of each of the four
features. An arrow appears above the name of a feature if that feature is active. If
there is no arrow above the feature, the feature is not active. In the above example,
the Automatic Callback feature is active because there is an arrow above that
feature abbreviation.
Note: If the feature requires you to dial a telephone number or extension, such as
Call Forwarding, you will temporarily see the digits you are dialing, rather than the
arrow, above the feature name.
↑ ↑
Display
Softkeys
Display control buttons
LWC CnLWC AutCB Timer
] ) located directly below the
] .
Menu
RingCentral Ex-1012, p. 15
RingCentral v. Estech
IPR2021-00573
11