Zhiyun CINEPEER CQ5 User Manual page 30

Firmware■Upgrade■and■Calibration
You can use "Zhiyun Gimbal Tools" to perform six-side calibration for
ZHIYUN CINEPEER CQ5.
1. Connect the ZHIYUN CINEPEER CQ5 to your computer using a USB Type-C
cable, plug the cable into the USB-C port of the CQ5, and turn on the CQ5, then
put it into standby mode.
2. Open "Zhiyun Gimbal Tools", click "open" on the top, and click "calibration" on
the bottom. Please conduct the process according to the following steps.
A " √ "mark will appear after the calibration is complete.
① Please refer to the six-side calibration steps below. When the calibration is
complete, please restart the gimbal.
② In simple terms, six-side calibration is to place all six sides of the phone
clamp vertically to a level surface respectively.
Six-side Calibration
26