APRILIA SL MILLE - PART 3 1999 Manual page 7

N
Position the vehicle on the side stand on
firm and level ground.
#
N
Position the pin (1) on the appropriate
seat on the rear fork.
#
N
Screw and tighten the screw (2) in the
appropriate threaded hole in the rear
fork.
58
use and maintenance SL mille
&
NOTE
Have someone help you keep the
vehicle in vertical position with the two
wheels on the ground.
#
N
Loosen the knob (3).
#
N
Move the fork support (4), positioning it
so that the width corresponds to the dis-
tance between the two pins (1) on the
rear fork.
#
N
Tighten the knob (3).
N
Make the two housings on the stand (4)
coincide with the two pins (1) provided
on the vehicle.
N
Rest one foot on the rear part of the
stand (5).
N
Push the stand (5) downwards until it
reaches the end of its stroke.
&
N
Position the vehicle on the appropriate
rear support stand, see beside (POSI-
TIONING THE VEHICLE ON THE REAR
SUPPORT STAND
N
Insert the two ends of the stand (6) in the
two holes (7) positioned on the lower
ends of the front fork.
N
Rest one foot on the front part of the
stand (6).
N
Push the stand (6) downwards until it
reaches the end of its stroke.
&
&
).