Table of Contents
Advertisement
Engine oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
CCMC G-4, A.P.I. SG specifications.
Fork oil (recommended):
If you need an oil with intermediate characteristics in comparison with the
FORK 20W, these can be mixed as indicated below:
0
SAE 10W =
F.A. 5W 67% of the volume, +
FORK 5W 67% of the volume +
0
SAE 15W =
F.A. 5W 33% of the volume, +
FORK 5W 33% of the volume +
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30 °C...+140 °C,
dripping point 150 °C...230 °C, high protection against corrosion, good resistance to water and oxidation.
Protection of the battery poles: neutral grease or vaseline.
Spray grease for chains (recommended):
Brake fluid (recommended):
Clutch fluid (recommended):
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35 °C at least.
Engine coolant (recommended):
90
use and maintenance SL mille
0
EXTRA RAID 4, SAE 15W - 50 or
0
0
F.A. 5W or
F.A. 20 W fork oil;
an alternative
FORK 5W or
0
F.A. 20W 33% of the volume or
0
F.A. 20W 67% of the volume or
0
CHAIN SPRAY or
Use new brake fluid only.
0
F.F., DOT 5 (DOT 4 compatible) or
Use new clutch fluid only.
0
F.F., DOT 5 (DOT 4 compatible) or
0
ECOBLU -40 °C or
TEC 4T SAE 15W - 50.
FORK 20W fork oil.
0
F.A. 5W and
FORK 20W 33% of the volume.
FORK 20W 67% of the volume.
0
AUTOGREASE MP or
CHAIN LUBE.
a
WARNING
BRAKE 5.1, DOT 5 (DOT 4 compatible).
a
WARNING
BRAKE 5.1, DOT 5 (DOT 4 compatible).
a
WARNING
COOL.
0
F.A. 20 W or
GREASE 30.
FORK 5W and
Advertisement
Table of Contents
