Table of Contents
Advertisement
ARRANGEMENT
OF THE 15A SECONDARY FUSES
A) From voltage regulator to:
high beam relay, low beam relay.
B) From voltage regulator to:
coils, engine stop relay, fuel pump.
C) From ignition switch to:
electric fans, clock.
D) From ignition switch to:
parking lights, rear stoplights, horn,
dashboard lights, direction indicators.
E) From ignition switch to:
electronic unit, fuel pump relay, engine
stop relay.
NOTE
Three fuses are spare fuses.
80
use and maintenance SL mille
ARRANGEMENT
OF THE 30A MAIN FUSES
F) From battery to: ignition.
G) From battery to: ignition.
NOTE
One fuse is a spare fuse.
NOTE
To check the direction of the
headlight beam, specific procedures must
be adopted, in accordance with the regula-
tions in force in the country where the vehi-
cle is used.
To adjust the headlight beam:
N
Position the vehicle on the side stand on
firm and level ground.
N
Turn the handlebar completely leftwards.
N
Working on the rear left side of the front
part of the fairing, adjust the appropriate
knob (4).
BY TURNING IT CLOCKWISE, you turn
the beam to the left.
BY TURNING IT ANTICLOCKWISE, you
turn the beam to the right.
Advertisement
Table of Contents
