The high beam blinking is operated by pressing the push
button, independently of the position of the light switch (
- •).
NOTE
To disconnect the high beam blinking, release the
push button.
6) COLD START LEVER ( )
The starter for the cold start of the engine is operated by rotat-
ing the lever " " downwards.
To disconnect the starter, move the lever " " to its initial po-
sition.
NOTE
The electrical parts work only when the ignition switch is
in position " ".
7) ENGINE STOP SWITCH (
Do not operate the engine stop switch "
conditions.
This is a safety or emergency switch.
With the switch in position " ", it is possible to start the en-
gine; the engine can be stopped by moving the switch to posi-
tion " ".
CAUTION
With stopped engine and ignition switch in position " ",
the battery may discharge.
When the vehicle has come to rest, after stopping the en-
gine, move the ignition switch to position " ".
-
)
WARNING
-
" in running
-
8) START PUSH BUTTON ( )
When the start push button " " is pressed, the starter makes
the engine run. For the starting, see p. 43 (STARTING).
use and maintenance SL mille
25