APRILIA SL MILLE - PART 2 1999 Manual page 20

NOTE
The electrical parts work only when the ignition switch is
in position " ".
1) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
24
use and maintenance SL mille
)
)
3) DIMMER SWITCH ( -
When the light switch is in position "
is in position " ", the high beam comes on, while if it is in po-
sition " ", the low beam comes on.
3) DIMMER SWITCH ( -
When it is in position "
light and the low beam are always on.
When it is in position "
4) HEADLIGHT SWITCH (
(not provided in the
When the light switch is in position "
the switch is in position "
board light are on; when the switch is in position "
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
5) HIGH BEAM SIGNALLER PUSH BUTTON (
LAP (multifunction)
NOTE
For the setting of the functions, see p. 18 (MULTI-
FUNCTION COMPUTER).
This push button makes it possible to use the high beam sig-
naller in case of danger or emergency, or displays the various
preset functions on the right multifunction display:
– hour and minutes;
– coolant temperature (°C or °F);
– chronometer.
)
": if the dimmer switch
)
" the parking lights, the dashboard
", the high beam comes on.
•
- - )
version)
•
", the lights are off; when
", the parking lights and the dash-
) /
", the