Dell POWEREDGE 4300 Service Manual page 99

Time
Date
Diskette Drive A
Diskette Drive B
Reserved Memory
CPU Speed
Num Lock
Processor 1
Processor 2
Fan Speed
System Alert
Keyboard Errors
Boot Sequence
Scan Sequence
System Password
Password Status
Setup Password
Mouse
Resets time on computer's internal clock.
Resets date on computer's internal calendar.
Identifies type of diskette drives installed.
Tape drives are not reflected.
Allows a region of system board memory to
be supplied by an expansion card with 15M -
16M or None (default).
Indicates the processor speed at which the
system boots (can toggle to a lower speed).
This option should be used only for trouble-
shooting purposes; otherwise, do not use.
On 101- and 102-key keyboards, determines
whether system boots with Num Lock acti-
vated (does not apply to 84-key keyboards).
Displays version or stepping number of the
microprocessor in each processor slot on the
system board.
Sets the fan speed to Full Speed (default) or
Noise Reduced.
Sets the system LED to flash when a critical
(Fault, the default) or noncritical (Warning)
error threshold is passed.
Enables or disables reporting of keyboard
errors during POST.
Determines whether system boots from dis-
kette (if present) or hard-disk drive.
Determines the order in which the PCI devices
are scanned by the system.
Displays current status of system's password
security feature. Also used to assign and verify
a new password. The system password is
overridden by the setup password.
If set to Locked, prevents the system pass-
word from being changed or disabled.
Requires that Setup Password option be set
to Enabled.
Restricts access to System Setup program.
The setup password overrides the system
password.
Enables or disables the built-in PS/2-
compatible mouse port.
System Setup Program A-3