Dell POWEREDGE 4300 Service Manual page 62

Dell computer motherboard user manual

Hide thumbs Also See for POWEREDGE 4300:

Table of Contents

4-4

Dell PowerEdge 4300 Systems Service Manual

front bezel

clips (3)

To remove the front bezel, follow these steps:

1. Remove the computer cover.

2. With your fingertips, gently pry loose the four tabs along the right edge of

the bezel, and disengage the three clips on the opposite edge from the

chassis (see Figure 4-2).

3. Rotate the bezel to the left to disengage it.

To replace the bezel, align the three clips on the edge of the bezel with the

slots on the chassis and press the bezel into place until the tabs on the oppo-

site edge of the bezel snap into place.

tabs (4)

Table of Contents