Dell POWEREDGE 4300 Service Manual page 61

Dell computer motherboard user manual

Hide thumbs Also See for POWEREDGE 4300:

Table of Contents

To remove the computer cover, follow these steps:

1. Turn the keylock on the back edge of the cover clockwise to the unlocked

position (see Figure 4-1).

2. Slide the cover a half-inch (about a centimeter) or so toward the back of the

computer, and grasp the top of the cover at both ends.

3. Lift the cover away from the chassis.

To replace the cover, make sure the keylock is in the unlocked position. Fit the

cover over the side rail at the bottom of the chassis and slide it closed.

keylock

computer cover

Removing and Replacing Parts

4-3

Table of Contents