Main Independent Controls; Controls On The Left Part Of The Handlebar - APRILIA ETV MILLE CAPONORD - ETV MILLE CAPONORD ABS - 2006 Use And Maintenance Book

MAIN INDEPENDENT CONTROLS

3
2
1
use and maintenance ETV mille Caponord ABS
22
4
CONTROLS ON THE LEFT PART OF THE
HANDLEBAR
NOTE
The electrical parts work only when the ignition switch
is in position ≈>∆.
1) HORN PUSH BUTTON (C)
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (B)
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH (D - E)
When the light switch is in position ≈M∆: if the dimmer switch
is in position ≈E∆, the high beam comes on; while if it is in
position ≈D∆, the low beam comes on.
3) DIMMER SWITCH (D - E) N
When it is in position ≈D∆ the parking lights, the dashboard
light and the low beam are always on.
When it is in position ≈E∆, the high beam comes on.
4) HIGH BEAM SIGNALLING PUSH BUTTON (E)
It makes it possible to use the high beam for signalling to
forthcoming vehicles while overtaking and in case of peril
and/or emergency.
The high beam blinking is operated by pressing the push
button, independently of the position of the light switch (M -
O - •
).
NOTE
To disconnect the high beam blinking, release the push
button.