Advertisement
Carefully read p. 43 (MAINTENANCE).
N
Position the vehicle on the centre stand.
N
Unscrew and remove the headlight metal
ring screw (1).
N
Remove the headlight metal ring (2).
#
N
Unscrew and remove the screw (3).
#
N
Unscrew and remove the three screws
(4).
#
N
Unscrew and remove the screw (5).
CAUTION
Proceed with care.
Do not damage the tangs and/or their
seats.
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
54
use and maintenance Habana 50/125 - Habana Custom 50/125
N
Move the lower handlebar cover (6)
carefully downwards.
#
N
Unscrew and remove the screw (7).
CAUTION
Proceed with care. Do not force the
electric wires.
N
Partially remove the reflector (8), releas-
ing the seat (9) from the pin (10).
NOTE
Upon reassembly, make sure
that the reflector (8), the seat (9) and the
pin (10) are in the correct position.
Carefully read p. 43 (MAINTENANCE).
N
Position the vehicle on the centre stand.
#
N
Unscrew and remove the screw (11).
N
Remove the headlight metal ring (12).
NOTE
Upon reassembly, insert the tang
(13) correctly in the appropriate seat.
Advertisement
