jablotron 100+ Manual page 6

1. Connect the power to the camera (initialisation takes approx. 1 minute).
2. Log in to the MyCOMPANY application and the INSTALLATION LIST will open.
3. Select the installation to which you want to register the camera.
4. Go to the CAMERAS tab (in down menu) and click onto REGISTER A CAMERA.
5. Scan QR with MAC address of the camera, SEARCH cameras and write the name which
will be displayed in MyJABLOTRON and click onto REGISTER.
6. When registration is confirmed in MyCOMPANY, in the following 24 hours the installer
can watch a live preview from this camera. However, this parameter can be extended or
shortened in MyJABLOTRON. Permanent livestreaming is available in the
MyJABLOTRON application for the end user.
Caution: Because of security reasons it is impossible to record data to another storage
system (like local NVR etc.). Access to the camera's internal settings is blocked.
MyCOMPANY programmable options
Settings of camera configuration is possible by clicking on chosen camera.
Camera configuration – following parameters are to be set:
Camera name – filled camera name will be displayed in MyCOMPANY and MyJABLOTRON.
Picture quality: 1 MPx, 2MPx, 3 MPx, 4MPx, 5MPx
Selecting one of the available options allows you to modify the image quality and data
bitrate.
Video retention period (record export to MyJABLOTRON): 3 days / 7 days / 15 days / 30
days
Depending on the subscription service, 10 or 60 clips are available. The recordings are
deleted either after the set period of time or when the number of clips is exhausted. Only
after this selected retention period, it is also possible to request the export of video clips.
Activation of video clips for sections: for each camera can choose according to options –
Alarm / Arm / Disarm state.
If the check button is set to ON for selected section, it means that video sequences will be
saved for those sections and events. The number of sections is according to the set
configuration and in each section, there are 3 events for which video sequences can be
saved. The camera saves the recording 30 seconds before and 30 seconds after the event, up
to 4.5 minutes after the event for the paid service.
Registration procedure: