Troubleshooting Enclosure Cooling Problems - Dell PowerVault E03J Series Hardware Owner's Manual

Dell computer drive hardware owner's manual
Hide thumbs Also See for PowerVault E03J Series:
Table of Contents

Advertisement

2 Reseat the power supply by removing and reinstalling it. See "Power
Supply/Cooling Fan Module" on page 39.
NOTE:
enclosure to recognize the power supply and to determine if it is working
properly.
If the problem is not resolved, see "Getting Help" on page 57.
3 If all LEDs on the power supply/cooling fan module are off and if the
enclosure is powered on, you must update the firmware. For information
about updating the firmware, see "Downloading Firmware" on page 26.

Troubleshooting Enclosure Cooling Problems

CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
Ensure that none of the following conditions exist:
Enclosure cover or drive blank is removed.
Ambient temperature is too high. See "Technical Specifications" in the
Getting Started Guide.
External airflow is obstructed.
The power supply/cooling fan module is removed or has failed. See
"Troubleshooting Power Supply/Cooling Fan Module" on page 50.
If the problem is not resolved, see "Getting Help" on page 57.
After installing a power supply, allow several seconds for the
Troubleshooting Your Enclosure
51

Advertisement

Table of Contents
loading

Table of Contents