Installing An Enclosure Management Module; Power Supplies - Dell PowerVault MD3060e Owner's Manual

Figure 18. Removing and Installing an Enclosure Management Module
1. enclosure management module
3. release tab

Installing An Enclosure Management Module

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Insert the enclosure management module into the bay until it seats into place.
2. Push the release lever toward the chassis until it clicks into place.
3. Connect all the cables to the enclosure management module.

Power Supplies

Your system supports two hot-swappable 1755 W power supply modules.
2. release lever
29