Removing A Raid Battery - Dell POWEREDGE 2950 Hardware Owner's Manual

Figure 3-17. Installing a RAID Battery
2
1
1 chassis battery carrier slot (2)
4 SAS RAID controller daughter
card battery

Removing a RAID Battery

1 Disconnect the cable between the RAID battery and the SAS RAID controller daughter card. See
Figure 3-17.
2 Press down and to the left on the battery carrier to disengage the carrier from the chassis battery carrier
slots.
3 Gently pulling back the two guides holding the RAID battery into the battery carrier, draw out the
RAID battery from the battery carrier.
3
2 battery cable
4
3 battery carrier
Installing System Components
75