Download Print this page
Philips dynalite DDC116-UL Installation Instructions

Philips dynalite DDC116-UL Installation Instructions

Signal dimmer controller

Advertisement

Quick Links

DDC116-UL
Signal Dimmer
Controller
Devices must be installed by a
qualified electrician in accordance with
all national and local electrical and
construction codes and regulations.
1
A
UL 2043 Plenum-rated
Les appareils doivent être installés par un
électricien diplômé conformément à tous les
codes et réglementations électriques et de
construction nationaux et locaux
RJ45
1
Chicago Plenum-rated
≤90%
113° F (45° C)
32° F (0° C)
Installation Instructions
Instructions d'installation
Instrucciones de instalación
Los dispositivos deben ser instalados por un
electricista calificado y cumpliendo todas
las normas y regulaciones, tanto nacionales
.
como locales, sobre instalaciones eléctricas
y obras.
4.33 in (110 mm)
0.71 in
(18 mm)
1.14 in (29 mm)
B
2 in (51 mm)
1.69 in (43 mm)

Advertisement

loading
Need help?

Need help?

Do you have a question about the dynalite DDC116-UL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Philips dynalite DDC116-UL

  • Page 1 Installation Instructions Instructions d’installation Instrucciones de instalación DDC116-UL Signal Dimmer Controller Devices must be installed by a Los dispositivos deben ser instalados por un Les appareils doivent être installés par un electricista calificado y cumpliendo todas électricien diplômé conformément à tous les qualified electrician in accordance with las normas y regulaciones, tanto nacionales codes et réglementations électriques et de...
  • Page 2 BLACK = LINE GREEN = EARTH 12 AWG (2.5mm²) WHITE = NEUTRAL = SWITCHED LINE VIOLET = 0-10 V+ / DA+ 18 AWG (0.75mm2) PINK = 0-10 V- / DA- DDC116-UL BLACK GREEN WHITE 0-10 V / DALI VIOLET PINK* DRIVER 0-10 V+ / DA+ 0-10 V- / DA-...
  • Page 3 RS-485 DyNet / DMX512 and UL924 AUX/ UL924 RS-485 DyNet / DMX512 and UL924 AUX/ UL924 +12V AUX/UL924 24-16 AWG +12V AUX/UL924 < 65 ft (20 m) 24-16 AWG 0.2-1.5mm < 65 ft (20 m) 0.2-1.5mm Service Service Switch Service Service Switch AUX/UL924 default is Normally Closed (Open = Active).
  • Page 4 No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered www.dynalite.com trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.