Figure 29-5 Clustering Management Configuration; Table 29-4 Clustering Management Configuration - ZyXEL Communications Dimension ES-4024 User Manual

The following table describes the labels in this screen.
LABEL
Clustering Manager
Active Select Active to have this switch become the cluster manager switch. A cluster can only
have one manager. Other (directly connected) switches that are set to be cluster managers
will not be visible in the Clustering Candidates list. If a switch that was previously a cluster
member is later set to become a cluster manager, then its Status is displayed as Error in
the Cluster Management Status screen and a warning icon (
summary list below.
Name Type a name to identify the Clustering Manager. You may use up to 20 printable
characters (no spaces are allowed).
VID This is the Management VLAN ID and is only applicable if the switch is set to 802.1Q VLAN.
All switches must be in the same management VLAN group to belong to the same cluster.
Switches that are not in the same management VLAN group are not visible in the
Clustering Candidates list. This field is ignored if the Clustering Manager is using Port-
based VLAN.
Apply Click Apply to save these changes to the switch.
Cluster Management

Figure 29-5 Clustering Management Configuration

Table 29-4 Clustering Management Configuration

Dimension ES-4024 Ethernet Switch
DESCRIPTION
) appears in the member
29-5