Uplink Scenario Example; Figure 3-7 Stacking Example 3 - ZyXEL Communications Dimension ES-4024 User Manual

Dimension ES-4024 Ethernet Switch

Figure 3-7 Stacking Example 3

See the chapter on CLI commands for information on configuring the stacking modules (as well as other ports)
using line commands.

3.7 Uplink Scenario Example

Use Ethernet cables when daisy-chaining/uplinking the switches. See the following figure for an example uplink
connection using the stacking module. You must uplink to a Gigabit switch using a cat. 5 Ethernet cable supporting
gigabit line rate when uplinking using the stacking module. Uplink scenarios using an uplink module depend on the
uplink module you use.
3-6 Hardware Connections