Figure 13-3 Mirroring: Summary Table; Table 13-3 Mirroring: Summary Table - ZyXEL Communications Dimension ES-4024 User Manual

Dimension ES-4024 Ethernet Switch
LABEL
Socket Number
You must set the IP Address/Address Prefix fields and select either UDP or TCP in
Select Any to apply to all TCP/UDP protocol port numbers or select the second option and enter
a TCP/UDP protocol port number.
Destination The next three fields pertain to the destination IP address and destination port.
Ignore Click this check box to ignore any traffic to all destination ports.
IP Enter a destination IP address in dotted decimal notation.
Address/Address
Specify the address prefix by entering the number of ones in the subnet mask.
Prefix
Socket Number
You must set the IP Address/Address Prefix fields and select either UDP or TCP in
Select Any to apply to all TCP/UDP protocol port numbers or select the second option and enter
a TCP/UDP protocol port number.
Add Click Add to inset the entry to the summary table below.
Cancel Click Cancel to reset the fields back to your previous configuration.
Clear Click Clear to reset the fields back to the factory defaults.
13.2.4 Editing and Viewing a Mirroring Rule
To view a summary of the rule configuration, scroll down to the summary table at the bottom of the Mirroring
screen.
To change the settings of a rule, click a number in the Index field.
The following table describes the related labels in this screen.
LABEL
Index This field displays the index number of a rule. Click this number to edit the rule settings.
Active This field indicates whether the rule is enabled (Yes) or disabled (No).
13-6
Table 13-2 Mirroring: Configuration
the Protocol field before you can configure the socket number.
the Protocol field before you can configure the socket number.

Figure 13-3 Mirroring: Summary Table

Table 13-3 Mirroring: Summary Table

DESCRIPTION
DESCRIPTION
Mirroring