Default Dvmrp Timer Values; Figure 25-3 Igmp Not Set Error; Figure 25-4 Unable To Disable Igmp Error; Figure 25-5 No Duplicate Vid Error Message - ZyXEL Communications Dimension ES-4024 User Manual

Dimension ES-4024 Ethernet Switch
Table 25-1 DVMRP
LABEL DESCRIPTION
Cancel Click Cancel to begin configuring this part of the screen afresh.
25.3.1 DVMRP Configuration Error Messages
You must have IGMP enabled when you enable DVMRP; otherwise you see the screen as in the next figure.

Figure 25-3 IGMP Not Set Error

When you disable IGMP, but DVMRP is still active you also see another warning screen.

Figure 25-4 Unable to Disable IGMP Error

Each IP routing domain DVMRP configuration must be in a different VLAN group; otherwise you see the
following screen.

Figure 25-5 No Duplicate VID Error Message

25.4 Default DVMRP Timer Values

The following are some default DVMRP timer values. These may be changed using line commands. Please see the
commands chapter later in this User's Guide.
DVMRP 25-3