Page 1
The following features are available in this PDF document. Quick Keyword Search Enter the keyword in the search box and hit the search button Quick Jump between Chapters Click the title of a specific chapter on the Contents to jump to it *Reading software such as Adobe Reader is needed to support the functions above.
Page 5
WARNING This product is not waterproof. Prevent contact with any kind of liquid with the ZHIYUN CINEPEER CF100. Never use the product in the rain or a humid environment. If water accidentally enters the device when using, please stop using it...
Page 6
Brief■Introduction Battery safety precautions: ① It is strictly prohibited to use batteries that are not provided by ZHIYUN. If you need to replace the battery, please contact ZHIYUN or designated agents. ZHIYUN will not be responsible for any battery accidents or equipment malfunctions caused by using batteries that are not officially provided by ZHIYUN.
Page 7
In case that any item is found missing, please contact ZHIYUN or your local selling agent. CF100 Light x1 USB Type C Cable x1 Barndoors x1* Diffuser x1* Storage Bag x1* Quick Start Guide x1 Items marked “*” are included in ZHIYUN CINEPEER CF100 COMBO.
Page 8
Get■to■Know■ZHIYUN■CINEPEER■CF100 Get to Know ZHIYUN CINEPEER CF100 Fans Light Shade DC Charging Port USB-C Port Display Screen Built-in Battery Control Handle Center 1/4" Threaded Hole...
Page 9
CINEPEER CF100 adopts high-capacity built-in lithium batteries, providing a solidly long runtime. The battery level is displayed on the screen. The following methods show how to charge your CINEPEER CF100 (you can still use the stick light when charging) : ①...
Page 10
Charging ② Charging via DC power adapter: Connect the DC power adapter to the stick light's DC charging port and an AC power outlet to charge the stick light. AC Power DC Power Adapter (100-240V) ① It is recommended to fully charge CF100 before using it. Low battery might impair the product performance.
Page 11
Installing■Modifiers Installing and Removing Barndoors Installing Expand the barndoors to both sides ① . Put the stick light (light shade side up) into the barndoors groove. Make sure the top of the stick light is aligned with the top of the groove. Press to ensure the stick light is engaged in the barndoors groove ②...
Page 12
Installing■Modifiers Removing Expand the barndoors to the position shown in the figure ① . Separate the upper part of the stick light from the groove with your thumbs as shown in the figure ② , while using other fingers to slide the stick light towards the outer side of the groove ③...
Page 13
Installing■Modifiers Installing and Removing Diffuser Installing Install the barndoors to the stick light and expand the barndoors to both sides to their vertical state ① . Put the diffuser onto the connection of the barndoors and the groove ② . Push the barndoors outward to put up the diffuser ③ . ①...
Page 14
Installing■Modifiers Removing Push the barndoors inward until the spacing of two becomes smaller ① and remove the diffuser from the ② . ① ②...
Page 15
Installing■Modifiers Installing Tripod Align the 1/4-inch screw at the top of the tripod with the 1/4-inch screw hole at the bottom of the CINEPEER CF100. Then, mount the CINEPEER CF100 onto the tripod. ① ② ③ Tripod is not provided. Please prepare separately.
Page 16
Installing■Modifiers Installing the Light Stand Align the 1/4-inch screw hole at the bottom of the CINEPEER CF100 with the 1/4- inch screw at the top of the light stand. Then, mount the CINEPEER CF100 to the light stand. ② ①...
Page 17
How■to■Use■ZHIYUN■CINEPEER■CF100 DO NOT stare at the glowing light chips when the device is operating. The IP rating of the outer case is IP20. ① When the temperature rises to a certain degree during use, the fan will automatically turn on to achieve the purpose of heat dissipation for the light.
Page 18
How■to■Use■ZHIYUN■CINEPEER■CF100 Operation Instruction 1. CCT Mode Settings Single press DIM button to switch to CCT mode. Press DIM button again to switch to color temperature/brightness option. Double press power button/rotate the dial to adjust the chosen option. Color temperature adjustment range: 0-100% Brightness adjustment range: 2700-6500K ����K...
Page 19
How■to■Use■ZHIYUN■CINEPEER■CF100 3. HSI Mode Settings Single press HSI button to switch to HSI mode. Press HSI button again to switch to Hue/Saturation/Intensity option. Double press power button/rotate the dial to adjust the chosen option. Hue adjustment range: 0° -360°; Saturation adjustment range: 0-100%;...
Page 20
Firmware■Upgrade CF100 supports firmware upgrade with “ Zhiyun Gimbal Tools” . The following steps show how to upgrade the firmware: 1. Visit the official website of ZHIYUN (www.zhiyun-tech.com), go to the CF100 product page, click "Download", find the USB driver, the calibration upgrade tool and the firmware and download.
Page 22
Product■Specifications Product Model: PL105 Built-in Battery 2600mAh/6S Capacity Max Power 100W Color Temperature 2700K-6500K Range Dimming Range 0-100% CRI ≥ 96 CRI/TLCI TLCI ≥ 98 LED Chip 324pcs Charging Time (PD) 2H 56min Lab Data 1 Charging Time (DC) 3H 3min Lab Data 2 CCT Mode Illuminance 1370(lux)
Page 23
The above data is gathered from internal experiments of ZHIYUN laboratories. Under different scenarios, data is different to some extent. Please refer to the...
Page 24
Guilin Zhishen Information Technology Co., Ltd (hereinafter referred to as "ZHIYUN") reserves all rights for final explanation of this instruction and other documents related to this product. The information is subject to update without notice.
Page 25
DO NOT use with incompatible components or in any way otherwise as mentioned or instructed in the product documents provided by ZHIYUN. The safety guidelines herein contain instructions for safety, operation and maintenance.
Page 26
1. Customers are entitled to replacement or free repair service in case of quality deficits found in the product within 15 days upon receipt of the product. 2. Customers are entitled to free repair service from ZHIYUN for any product proven defective in material or workmanship that results in product failure during normal consumer usage and conditions within the valid warranty period, which is 12 months counting from the date of selling.
Page 27
Warranty■Card Customer Information Customer Name: Phone Number: Address: Sales Information Sales date: Product Serial Number: Distributor Name: Distributor’ s Contact Number: First Maintenance Record Service Date: Repairman Signature: Cause of Problem: Service Result: □ Solved □ Unsolved □ Refunded/Replaced...
Page 29
E-mail: info@zhiyun-tech.com Address: 09 Huangtong Road, Tieshan Industrial Zone, Qixing District, Guilin, 541004, Guangxi, China For full product information, please visit ZHIYUN's official website: Content on www.zhiyun-tech.com is subject to update without notice. ZHIYUN ™ is a trademark of ZHISHEN All product names or brands referred to hereunder may be trademarks or registered trademarks of their respective holders.
Need help?
Do you have a question about the CINEPEER CF100 and is the answer not in the manual?
Questions and answers
Tamaño del diámetro de la punta del conector CC, porque mi adaptador de corriente tiene una punta (diámetro más pequeño).