Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hanwha Techwin TNU-6324ER
Summary of Contents for Hanwha Techwin TNU-6324ER
- Page 1 NETWORK CAMERA User Manual TNU-6324ER TNU-6324E...
- Page 2 Network Camera User Manual Copyright ©2024 Co., Ltd. All rights reserved. Hanwha Vision Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
- Page 3 7. Before supplying power to the device, make sure the power source supports AC110-220V, 1.4 A (TNU-6324E), cosmetics, and oils that contain alcohol, solvent, or surfactants as they may cause damage or deformation of 1.7 A (TNU-6324ER), and 50/60 Hz. the product. If necessary, use a neutral detergent.
- Page 4 Recommended PC Specifications Password setting What’s Included (TNU-6324ER) Login What’s Included (TNU-6324E) Camera Web Viewer Setup Optional Accessories for Installation At a Glance (TNU-6324ER) At a Glance (TNU-6324E) APPENDIX Troubleshooting INSTALLATION & CONNECTION Installation (TNU-6324ER, TNU-6324E) Connecting with other Device...
- Page 5 RECOMMENDED PC SPECIFICATIONS WHAT’S INCLUDED (TNU-6324ER) Please check if your camera and accessories are all included in the product package. ~ CPU : Intel(R) Core(TM) i7 3.4 GHz or higher (As for each sales country, accessories are not the same.)
- Page 6 overview WHAT’S INCLUDED (TNU-6324E) OPTIONAL ACCESSORIES FOR INSTALLATION Please check if your camera and accessories are all included in the product package. You can purchase appropriate optional accessories available. (As for each sales country, accessories are not the same.) Wall Mount Pole Mount Corner Mount Pedestal Mount...
- Page 7 AT A GLANCE (TNU-6324ER) AT A GLANCE (TNU-6324E) Appearance Appearance Item Description Item Description Main Housing Built-in main circuit board and tilt motor system. Main Housing Built-in main circuit board and tilt motor system. IR housing Built-in IR LED circuit board.
- Page 8 ~ The weight of TNU-6324ER and TNU-6324E is approximately 36kg (without Pedestal) and 25kg (without pedestal), respectively. When installing the product, at least two people wearing a pair of non-slip gloves are needed for safety.
- Page 9 Sunshield The weight of TNU-6324ER and TNU-6324E is approximately 36kg (without Pedestal) and 25kg (without pedestal), respectively. It is highly recommended to wear proper non-slip gloves and the transporting rope. You need to be very careful when lifting.
- Page 10 Optional Accessories for Installation ` Installing using Wall Mount For your easier installation, you can purchase appropriate optional accessories available. ` Installing using Pedestal Mount <TNU-6324ER> <TNU-6324ER> <TNU-6324E> 1. Assemble the wall mount below the base housing with the provided wrench bolts (M8X15).
- Page 11 ` Installing using Wall/Pole mount ` Installing using Wall/Corner mount <TNU-6324ER> <TNU-6324ER> <TNU-6324E> <TNU-6324E> 1. Assemble pole mount sides with the wall mount using a set of 4 bolts. 1. Assemble corner mount sides with the wall mount using a set of 4 bots.
- Page 12 & connection How to install the grounding wires CONNECTING WITH OTHER DEVICE Ethernet External cables <TNU-6324ER> <TNU-6324ER> Ethernet External cables <TNU-6324E> 1. Assemble the grounding cable as shown in the figure using the provided washers (M5, INTERNAL TOOTH) and screws (MS PH M5X8).
- Page 13 Ethernet Connection How to connect external cables for each model Connect the Ethernet cable to the local network or to the Internet. Connect external cables by referring the table below. Connect alarm input/output cables for each terminals one by one. Network Cable Specification Item Contents...
- Page 14 installation & connection How to connect the RJ45 waterproof cable to a LAN cable How to interconnect Washer pump This camera can be used with connected to the washer pump. 1. Insert it through the arrow direction. ~ For more information about the washer pump connection and usage, see the descriptions of the external cables on page 13 and refer to the washer pump manual.
- Page 15 network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE You can set up the network settings according to your network configurations. MODEM CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN INTERNET 1.
- Page 16 network connection and setup USING DEVICE MANAGER If using a Broadband Router ~ IP Address : Enter an address falling in the IP range provided by the Broadband Router. Device manager program can be downloaded from <Support>-<Online Tool> menu at Hanwha Vision website ex) 192.168.1.2~254, 192.168.0.2~254, (https://www.HanwhaVision.com).
- Page 17 ~ Example of the Dynamic IP environment configure the IP. TNU-6324ER - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server 2. Click < + > at the main page of device manager.
- Page 18 network connection and setup PORT RANGE FORWARD (PORT MAPPING) SETUP Setting up Port Range Forward for several network cameras ~ You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page. If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the ~ A user can change each port using the camera setting screen.
- Page 19 CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run device manager. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet browser.
- Page 20 web viewer web viewer CONNECTING TO THE CAMERA Connecting via Bonjour 1. Run the client or operating system in support of the Bonjour protocol. Normally, you would 2. Click the camera name for search. In the Mac operating system, click the camera name searched from the Bonjour tab of Safari. 1.
- Page 21 PASSWORD SETTING CAMERA WEB VIEWER SETUP When you access the product for the first time, you must register the 1. Click the [Setup ( )] icon. login password. 2. The Settings window appears. 3. You can configure settings for the camera’s basic information, video, audio, network, event, analysis, and For a new password with 8 to 9 characters, you must use at least 3 system over the network.
- Page 22 appendix TROUBLESHOOTING PROBLEM SOLUTION PROBLEM SOLUTION No operation ~ Check the power source. Make sure the power supply termination. ~ Verify the settings in the following sequence: <Motion detection> of <Analytics> is set to <Enable>, but no notification A. Check <Data & Time> settings. No network ~ Check the RJ45 cable termination.
- Page 23 Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the TNU-6324ER and is the answer not in the manual?
Questions and answers