Advertisement
Quick Links
Advertisement
Related Manuals for Hanwha Techwin WISENET SCB-6005
Summary of Contents for Hanwha Techwin WISENET SCB-6005
- Page 1 High Resolution Box Camera User Manual SCB-6005...
- Page 2 High Resolution Box Camera User Manual Copyright ©2020 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company.
- Page 3 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
- Page 4 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (Hanwha Techwin is not liable for problems caused by unauthorized modifications or attempted repair.) 10.
- Page 5 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
- Page 6 important safety instructions Other Notes 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 7 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
-
Page 8: Table Of Contents
contents INTRODUCTION Features Components and Accessories Overview Lens CONNECTION Connecting to Monitor Connecting to Power Control via RS-485 Interface To connect the Day & Night Input To connect the Motion Detection Output Using Coaxial Communications CAMERA OPERATION Menu Configuration Menu Setup TROUBLESHOOTING Troubleshooting 8_ contents... -
Page 9: Introduction
introduction FEATURES y High Resolution Use of a 2 mega pixel CMOS device provides clear pictures with a resolution of 1945x1097. y Excellent Sensitivity The built-in high sensitivity COLOR CMOS produces a clear image. - Color : 0.04Lux (F1.2, 1/30sec) BW: 0.004Lux(F1.2) y SSNR4 Function High performance DSP chip removes noises of GAIN resulting from the low light level and... - Page 10 introduction COMPONENTS AND ACCESSORIES Check if the following items are included in the product package. High Resolution Box Camera User Manual SCB-6005 Camera User Manual Terminal Block Sheets lens mount 10_ introduction...
- Page 11 OVERVIEW Front View Tripod Mounting Bracket Screw Hole : ❶ ` Used to fix the camera on a bracket. The screw sizes for this hole are as follows. 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) Lens adaptor : IInstall this if you use the lens. Auto Iris Lens Connector : Used to connect Auto Iris Lens plug.
- Page 12 introduction Rear View VIDEO POWER Function Setup switch Press the Function Setup switch briefly to display the menu screen. After the menu is displayed on the screen, move the cursor <up/down/left/right> to select the desired item or to change the value or status. ...
- Page 13 LENS The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.
- Page 14 introduction When Using a C/CS-Mount lens (Not included) Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a simple modification is required.
- Page 15 y When Using a C-Mount Lens 1. Remove the protective glass cover at the front of this product and turn the C-Mount Adapter clockwise to install it. C-Mount Adapter (Not included) 2. Turn the C-Mount lens clockwise to install it. C-Mount Adapter (Not included) 3.
-
Page 16: Connection
connection CONNECTING TO MONITOR Connect the Video OUT port on the rear panel of the camera to a AHD DVR. RE C HD D ALAR M NETWOR K BACKUP POWE R AHD DVR VIDEO POWER SCB-6005 Monitor y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. - Page 17 When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
- Page 18 connection TO CONNECT THE DAY & NIGHT INPUT Connect one strand of each signal line (2-strand) of the Illumination Sensor to the [DN] port, and connect the other strand to the [GND] port. y D/N switch input wiring diagram External Inside of the camera VCC_3.3V connection...
- Page 19 USING COAXIAL COMMUNICATIONS y Coaxial Communications System y OSD Control method CAMERA CONTROLLER MENU/ENTER OSD KEY UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT RE C HD D ALAR M NETWOR K BACKUP POWE R Coaxial - Video Cable...
-
Page 20: Camera Operation
camera operation MENU CONFIGURATION MAIN SETUP VIDEO FORMAT ◦ ◦ CVBS ◦ ◦ ◦ BASIC DAY/NIGHT BACKLIGHT PROFILE ◦ ◦ ◦ INDOOR USER ◦ ◦ ◦ OUTDOOR INDOOR WHITE BAL ◦ ◦ AWC → SET MANUAL ◦ ◦ ◦ BRIGHTNESS LENS SHUTTER EXPOSURE... - Page 21 MAIN SETUP 1. VIDEO FORMAT Select the Change the status 2. PROFILE function using BASIC using the Function the Function 3. WHITE BAL Setup switch. Setup switch. 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
- Page 22 camera operation PROFILE 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘PROFILE’ by using the 1. VIDEO FORMAT Function Setup switch so that the arrow 2. PROFILE BASIC indicates ‘PROFILE’ . 3. WHITE BAL 2. Select a desired mode using the 4.
- Page 23 White Bal (White Balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by using 1. VIDEO FORMAT the Function Setup switch so that the 2. PROFILE BASIC arrow indicates ‘White Bal’...
- Page 24 camera operation EXPOSURE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’ . 2. Select a desired mode using the Function Setup switch. y BRIGHTNESS : Adjusts the video EXPOSURE brightness.
- Page 25 y AGC (OFF/LOW/MIDDLE/HIGH/VERY HIGH) : The higher the gain level, the brighter the screen - but the greater the noise. y SSNR4 : This function reduces the background noise in a low luminance environment. - OFF : Deactivates SSNR4. Noise is not reduced. - ON : Activates SSNR4 so that noise is reduced.
- Page 26 camera operation BACKLIGHT The camera uses high performance DSP chips that are designed to clearly display the object and the background despite severe reverse light. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’ . 2.
- Page 27 SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’ . 2. Select a desired mode using the Function Setup switch. y DISPLAY If the SPECIAL menu screen is ➊M SPECIAL displayed, use the Function Setup...
- Page 28 camera operation - FONT COLOR : You can change the OSD font color. (WHITE, YELLOW, GREEN, RED, BLUE) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. y COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device.
- Page 29 - PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the higher the PED level gets. - COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the smaller the color gain gets and the more color blind it gets.
- Page 30 camera operation If you set the AGC mode to off on the exposure menu, you cannot switch the day/night mode to auto. When a bright light source is in the screen or there are frequent brightness changes, if you use the auto night/day mode, and set the switching time to short (3, 5 sec), a hunting can be caused.
- Page 31 y PRIVACY: Mask an area you want to hide on the screen. ➊MM I f the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘PRIVACY’ . ➋MM S elect a desired mode using the Function Setup switch. y AREA : You can select up to PRIVACY AREA 8 PRIVACY areas.
- Page 32 camera operation y ARM OUT : When object ALARM OUT movement is EXTERNAL detected, the detection signal will RETURN be outputted. ` EXTERNAL : Send signals through external terminals. ` OSD : Display signals on the screen. RETURN : Return to the MOTION DET menu. y SENSITIVITY : Set the sensitivity of the motion detection.
- Page 33 EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. y SAVE : Save the current settings and exit the MAIN SETUP menu. y NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. y RESET : Revert camera to factory settings.
- Page 34 troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and AHD DVR are properly connected.