Dormakaba GP1000 Installation Instructions Manual page 5

dormakaba GP1000 Dummy Glass Mount (for top latching)
Installation Instructions
2.2 Mount exterior pull components - disassemble actuator parts
Fig 3
NOTE: PANIC DEVICE SHOULD BE MOUNTED TO DOOR IN A HORIZONTAL POSITION.
LAY GLASS PANEL FLAT ON SAW HORSES AND MOUNT THE FOLLOWING
EXTERIOR PULL COMPONENTS FIRST. EXTERIOR SIDE SHOULD FACE UP.
INTERIOR
Exterior
pull
Bushings
GP1000 Glass Panic
Actuator
assembly
Exterior
pull
Top of
door
Mounting
assembly
Exterior
housing
screw
974007
Bottom
of door
NOTE: Product shipped with exterior
housing screw and mounting plate
assembly secured together.
2.2.1 Disassemble exterior housing
screw and mounting plate
Actuator
housing
assembly from actuator housing.
2.2.2 Keep bushing for installing later.
Amount is determined based off
of glass thickness.
plate
Exterior Pull - Actuator
Pull Options
Door side Pull type
Interior D
Exterior D (shown)
10-2020
5