Intelix AVO-A2-WP110 Installation Manual

Download this manual

Intelix AVO-A2-WP110

Installation Manual

Introduction

The Intelix AVO-A2-WP110 wallplate balun transmits two mono or

one stereo analog audio signal over standard unshielded twisted pair

cabling, such as Cat 5 or Cat 6. Used in pairs or with a compatible

Intelix balun, the AVO-A2-WP110 transmits analog audio in either

direction up to 2,500 feet and is ideal for corporate A/V, churches,

schools, auditoriums, and almost any other situation involving audio

distribution.

The AVO-A2-WP110 features two female RCA connectors on the

front and a 110 punch-down termination on the rear. The unit includes

a 110 termination tool.

The Intelix AvoCat Series of baluns is the ideal solution for sending

audio and video over structured cabling. When signal quality

matters, choose Intelix.

Need help?

Do you have a question about the AVO-A2-WP110 and is the answer not in the manual?

Page 1 110 punch-down termination on the rear. The unit includes a 110 termination tool. The Intelix AvoCat Series of baluns is the ideal solution for sending audio and video over structured cabling. When signal quality matters, choose Intelix.
Page 2 3. Verify the desired twisted pairs are not being used for other LAN or telephony equipment. 4. Connect the AVO-A2-WP110 to a twisted pair cable, such as Cat 5 or Cat 6. Verify the pinout on the balun conforms to EIA/TIA 568B standards, as labeled on the balun.
Page 3 110 punch-down connector on the rear of the balun. Troubleshooting If your equipment malfunctions with AVO-A2-WP110 baluns in place, follow the troubleshooting procedures below: 1. Perform diagnostics on source and destination equipment following the manufacturer’s instructions.
Page 4 Dimensions Front: 4.00” x 1.50” x 0.25” Rear: 2.00” x 1.50” x 1.25” Shipping Weight 1.0 lbs Ordering Information AVO-A2-WP110 – bulk packaged unit AVO-A2-WP110-PAC – retail packaged unit Included Accessories 110 termination tool Warranty 2 years Distances and picture quality may...