Page 1
The Intelix AVO-A4-WP110-EU wallplate balun transmits four mono or two stereo analog audio signals over standard unshielded twisted pair cabling, such as Cat 5 or Cat 6. Used in pairs or with a compatible Intelix balun, the AVO-A4-WP110-EU transmits analog audio in either...
Page 2
This will help eliminate stray EMF interference. 6. Mount the AVO-A4-WP110-EU in a wallbox. 7. Connect a second compatible Intelix balun to the opposite end of the twisted pair cable. Verify the pinout on the balun conforms to EIA/TIA 568B standards.
Page 3
110 punch-down connector on the rear of the balun. Troubleshooting If your equipment malfunctions with AVO-A4-WP110-EU baluns in place, follow the troubleshooting procedures below: 1. Perform diagnostics on source and destination equipment following the manufacturer’s instructions.
Page 4
Front: 8.59 cm x 8.59 cm x 0.64 cm (3.38” x 3.38” x 0.25”) Rear: 5.08 cm x 3.81 cm x 3.18 cm (2.00” x 1.50” x 1.25”) Shipping Weight 1.0 lbs Ordering Information AVO-A4-WP110-EU – bulk packaged unit Included Accessories 110 termination tool Warranty 2 years...