Nova 9121-R How To Assemble

HOW TO
ASSEMBLE YOUR
Adjustable Bath Seat
Item # 9121/9121-R
Capacity not to exceed 300 lb
1
Remove all parts from box:
Ensure all parts are included before assembling
a. (1) Seat/Frame
b. (4) Legs and extensions
2
Place the seat face down on a level surface.
Insert the legs into the seat frame. Depress
the brass button at the top of the leg and
push the leg into the seat frame until the
brass button protrudes out of the hole.
Ensure that the brass button "clicks" and
locks into position. Use the push buttons and
numbered holes on the leg to adjust the seat
to a desired height. Ensure that each leg is
set to the same height, stable, and all push
buttons "click" and lock into position.
HOW TO USE
Place the bath bench in the shower or bath tub.
Ensure that the bench is stable and not wobbly.
Use the slots on the side of the seat as handles
to assist in sitting down or getting up from the
bench. The two round slots in the front and rear
corners of the seat can be used to place a hand
held shower set if needed. NOTE: Use both hands
to hold onto the side handles to ensure stability
of the bath bench. Using only one hand on either
side can topple the bench.
No tools required
Quick Assembly
Easy to follow
step by step
instructions
a.
*Hand Held Shower Set not included*
b.