Advertisement
(5060,5080,5090,5160,5180,5165,5185,5190,5195,5200)
YOU MUST READ THIS MANUAL BEFORE USING THIS PRODUCT
DO NOT
Use this product without first reading and understanding this manual.
DO NOT
Use this equipment without first reading and understanding Nova's terms.
If you are unable to understand the, CAUTIONS, TERMS AND CONDITIONS, AND INSTRUCTIONS,
then contact a healthcare professional, dealer, lawyer, or a qualified technician before attempting to use
this product - OTHERWISE INJURY OR DAMAGE MAY RESULT.
By using or continuing to use this product, YOU ARE AGREEING TO THE NOVA TERMS AND
CONDITIONS detail at www.novaortho-med.com.
Distribution center:
Nova Medical Products
8730 West 50th St.
McCook, IL 60525
OWNER'S MANUAL
NOVA WHEELCHAIRS
5000 SERIES
YOU MUST SUPPLY THE OWNER WITH THIS MANUAL
WARNINGS
For questions regarding this manual or the product, contact
1-800-557-6682
www.novamedicalproducts.com
OWNER
DEALER
Corporate Office
Nova Medical Products
1470 Beachey Pl.
Carson, CA 90746
Advertisement
Table of Contents
Related Manuals for Nova 5060
Summary of Contents for Nova 5060
- Page 1 - OTHERWISE INJURY OR DAMAGE MAY RESULT. By using or continuing to use this product, YOU ARE AGREEING TO THE NOVA TERMS AND CONDITIONS detail at www.novaortho-med.com.
-
Page 2: Operating Instructions
After any adjustment, and before using the product, ensure that all attaching hardware, including without limitation all grips, screws, nuts, bolts, clamps, fasteners, and parts are tight and secure. DO NOT use parts, accessories, or adapters other than those manufactured by Nova Ortho Med., Inc, which are designed specifically for this product. - Page 3 PROPER USE OPENING CHAIR Tilt wheelchair to one side and push down on the seat rail until fully opened. CLOSING CHAIR Fold footrests to the closed/vertical position. Tilt product to one side and lift up on seat rail until fully closed.
- Page 4 SAFETY INSPECTION- MAINTENANCE Your product is a precision product - proper care will ensure proper function. Regular cleaning will reveal loose or worn parts. DO NOT over tighten parts or hardware, as doing so can damage the frame. DO NOT operate the product if there are any missing parts or hardware. You should have a dealer or qualified professional perform maintenance on your product at least once every six months, or immediately if you notice any item needing service.
- Page 5 FOOT REST ASSEMBLY INSTALLING LEG REST 1 - Hold the foot assembly in position as if it were in position for use. 2 - Turn the front foot assembly to the side (so that open foot plate, which was perpendicular to the wheel, is now parallel with the wheel).
-
Page 6: Wheel Locks
WHEELS Solid rubber tires need minimal maintenance, but should be cleaned occasionally with a damp cloth. Replace if tires become severely worn or cracking appears. REPLACING TIRES DO NOT ATTEMPT – Please see a dealer or qualified technician. REMOVING AND REPLACING REAR WHEELS 1 - Remove dust cap (if any). - Page 7 ANTI-TIPPING SUPPORTS We recommend that you use anti-tipping supports to enhance the safety of your product. If your product did not come with anti-tipping supports, and safety is your concern, then consider purchasing this additional item. INSTALLING ANTI-TIPPING SUPPORTS Specific anti-tipping supports are only useful with certain seat angles and heights. If you cannot properly adjust the anti-tipping supports given your seat angle or seat height, then DO NOT use product - contact a dealer or technician.
Need help?
Do you have a question about the 5060 and is the answer not in the manual?
Questions and answers