Omtech USB475a User Manual page 30

4.4.2 Setting the Laser Power
When you press ENT in the main interface, the cursor box will initially select the "Speed" parameter, as shown in the
figure below:
Push the ▲ and ▼ keys to change between the parameters. Select the "Power" parameter, as shown below:
Press ENT while the red cursor is on "Power" and the following interface pops up:
Push the ▲ and ▼ keys to change the parameter value. Press ENT to save the change. Press ESC to invalidate the
change and return to the main interface.
4.4.3 Setting the Laser Speed
When you press ENT in the main interface, the cursor box will initially select the "Speed" parameter, as shown in the
figure below:
26