Bowflex SelectTech 1090 Troubleshooting Manual page 2

3/11/24, 9:22 AM
7.
If the issue persists, remove all weight plates from the base. Retest the handle in the base and add 1 pair of weight
plates at a time. Retest the selection dial after each pair is added [11910.E]. If the issue is caused when a particular
plate is added, order a Weight Plate
everything, order a Handle
8.
Once all parts are reassembled, perform a lock test
test? [11910.H]
Need to order replacement parts?
1 Customer Care Contact Information
Please contact Customer Care at
Some replacement parts may also be available for purchase
A list of part numbers referenced within this guide can be located at the bottom of this page.
Customer Care - Hours of Operation:
Monday - Friday 6:00am - 5:00pm PST
The replacement part will be provided to you at no cost assuming your machine meets the warranty eligibility
requirements. A Customer Care Agent will be able to assess your current warranty eligibility and provide you with your
options.
Please note that if you did not purchase your machine directly from BowFlex, Schwinn, or Nautilus, we will need a copy
of your purchase receipt in order to register your machine for warranty.
2 Parts Reference Table
Part Description
2.5 lb Weight Plate
5 lb Weight Plate
7.5 lb Weight Plate
10 lb Weight Plate
15 lb Weight Plate
Base Assembly
Handle Assembly
3 Contact Tech Team / Advanced Troubleshooting
If the issue was not resolved in the steps listed, contact the Tech Team or send an Advanced Troubleshooting
case.
with
Submit a Case case
about:blank
SelectTech 1090  Dumbbells:  Why isn't the adjustment knob turning?
for the affected plate(s) [11910.F]. If the issue occurs after reassembling
Assembly [11910.G].
1-800-605-3369
type Advanced Troubleshooting
here: SelectTech Dumbbells: How do I perform a lock
for additional help or to order replacement parts.
online here.
Part SKU
000-5020
000-5022
000-5024
000-5026
000-5028
000-5046
000-4979
2/2