Marport Catch Pro User Manual page 6

Important: To ensure proper and safe use of this equipment, carefully read and follow
the instructions in this manual.
When using the product, be careful: strong impacts can cause damage to the electronic
components inside.
Never place the product in a hazardous and/or flammable atmosphere.
Install and use this product in accordance with this user manual. Incorrect use of the product
may cause damage to the components or void the warranty.
Notice: Do not open the sensor bottle. Only qualified Marport technicians can do
maintenance and repairs on internal components of the sensors.
CAUTION: In case of water ingress in the product, do not charge it: battery may vent or
rupture, causing product or physical damage.
Here are some examples of data received from Catch Explorer and Catch sensors displayed in
Scala2.
You can install several sensors on the codend to better follow the filling processes. It is very
useful to determine the amount of fish inside the trawl net: you can prevent damage to fish and
increase the security of crew and vessel.
For example, you can install three sensors on the codend. They will trigger one by one,
according to the amount of fish inside the codend. After a few tows, you can estimate the
Safety Guidelines
Basic good practices
Product installation and use
Precautions
Applications
Catch Control System Installation
Catch Pro Sensors | V1 |
Introduction and Presentation
6