Page 1
Thank you for buying a Rohnson cordless stick vacuum cleaner with digital brushless motor (BLDC) ** Scan with your phone or QR reader to find out more about your machine...
Page 2
SAFETY INSTRUCTIONS The vacuum cleaner is specially used for household purpose, please do not use it for commercial or other purposes. 1. Please don't use the vacuum cleaner to suck detergent, kerosene, glass waste, needles, cigarete ash, moisturized dust, sewage, matches, similar ar�cles or any liquid. 2.
Page 3
BATTERY INSTRUCTIONS -This appliance includes Li-ion bateries, do not incinerate or expose them to high temperature, as they may explode. -Leaks from the batery or batery cells can occur under extreme condi�ons. Do not touch any liquid that leaks from the batery. If the liquid gets into contact with skin, wash immediately with soap and water.
Page 4
PRODUCT COMPONENTS 1. Wall hanger (rechargeable) 2. Flat nozzle 3. 2 in 1 upholstery nozzle for sofas and pet hairs 4. Battery pack release button 5. On/Off button 6. Speed button 7. Air outlet 8. Dust cup 9. Dust cup release button 10.
Page 5
CHARGING THE BATTERY The vacuum is powered by the built-in lithium batery. Before first use, charge the batery for at least 4.5-5hours. You can charge the batery in two ways - see below Method 1 & Method 2 The vacuum cannot work while charging. The vacuum cannot be charged when the ambient temperature is below 10°C/50°F or above 45°C/113°F.
Page 6
Method 2: (a) Connect the adapter to the charging port on the main unit like image B below. image B NOTE: Only charge with the provided adapter. ASSEMBLING / DISASSEMBLING 1. Install the batery pack. Fit the batery pack into the main body base un�l it clicks into the posi�on. If need to remove the batery pack, hold the main body, press the release knob and remove it.
Page 7
aluminum tube, press the flood brush or accessory release knob and remove the brush or accessort from the tube. NOTE: Always remove the plug from power socket before fitting or removing accessories! OPERATION METHOD for at least 4.5-5hours. Before first use, ensure the vacuum cleaner has been charged Press the switch button, the machine will start to work.
Page 8
•To avoid the dock dropping down, please make sure it must be installed firmly. CLEANING AND MAINTANANCE When the filters are blocked due to excessive dust, they must be cleaned and if necessary, they can also be replaced. To ensure maximum efficiency, it is suggested to clean the filters regularly (at least twice a month) and to replace the filters at least once a year.
Page 9
4. Turn the outlet HEPA filter an� clockwise to release it. (image B) 5. Shake off debris by tapping the filters against your trash container 6. Wash the filters with cold water only, under a running tap. Repeat washing the filter un�l clean water runs.
Page 10
2.Press the rolling brush release buton to release the rolling brush locking strip. 3.Take out the rolling brush locking strip and li� the rolling brush to remove. 4.Clean the rolling brush using scissors or other tools, rinse and then air-dry the rolling brush.
Page 11
Filter cannot be inserted Filter not fi�ng properly in slot Check filter and fi�ng are correct correctly TECHNICAL SPECIFICATIONS: MODEL: Rohnson mamba compact M6 BATTERY: Li-Ion 18.5V, 2200mAh POWER: 215W DIGITAL MOTOR (BLDC motor) IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
Need help?
Do you have a question about the mamba compact M6 and is the answer not in the manual?
Questions and answers