Related Manuals for Rohnson Mamba RM-05
Summary of Contents for Rohnson Mamba RM-05
- Page 1 ROBOTIC VACUUM CLEANER Mamba RM-05 Thanks, you for buying a Rohnson robot vacuum cleaner Scan with your phone or QR code to find out more about your machine...
- Page 2 Important Note: Activate the vacuum cleaner by lifting the magnetic cover and by setting the switch to the “I” position.Then press and hold HOME & POWER until you hear''Start network configuration’’ Reset Wi-Fi. The Wi-Fi LED blinks to wait for connection and will remain steady when the process is complete.
- Page 3 aiting In order to improve the product, we reserve the right to update the app and software.
-
Page 4: Safety Information
Safety information This product is intended exclusively for domestic cleaning of washable floor coverings and carpets. Never use the robot to clean outdoor areas, balconies or terraces. The robot is not intended for cleaning commercial areas or industrial buildings. • Never climb or sit on the robot or the All Comfort charging station (hereinafter referred to as the station). •... -
Page 5: Laser Safety
• Never use damaged cables. If your cable has damaged insulation or shows other signs of damage, stop using it immediately and contact our customer service line. • If the robot will not be used for a long time, first fully charge it, then turn it off and store it in a cool and dry place. Fully charge the robot at least every 3 months in order to avoid to avoid battery damage. - Page 6 Discription of the vacuum cleaner Magnetic top cover of the robot Wi-Fi indicator light Bumper 3D Laser Action obstacle recognition sensor Camera (must be in the "on" position to use the camera) Sensor for precisecleaning along the walls Start/Stop button: Start pairing: HOME button: –...
- Page 7 - to turn on and charge the robot, it must be in position "I" Side brush Ultrasonic sensor Front wheel Robot info Airmax main brush Main wheels Main brush cover fuse Mops...
- Page 8 Water refill valve Charging contacts HEPA filter...
- Page 9 List of automatic cleaning stations Indicator lights To start or interrupt the current program, press the START/STOP button.To end the current program, press and hold the START/STOP button for 3 seconds. To exit the station and return to the station, press the HOME button.
- Page 10 Station signal transmitter Water filling valve Notice Remove objects such as cables, hard and sharp objects from the cleaned floor to prevent them from being sucked in or entangled. Also, keep fragile objects such as vases out of reach that could be knocked over and damaged by the robot.
- Page 11 2. Connect the power cable, see image and check if the display lights station. Wind the excess cable onto the plastic holder on the back of the station. You can lead the cable out of the station, both to the left and to the Location of the cleaning right.
- Page 12 Power on and charge Take off the upper cover of the robot, remove the transport foam of the bumper, and switch the main switch to the "I" position. Then wait until the Start/Stop button stops flashing and remains lit, then the robot is in ready state. Switching the main switch to position "0"...
- Page 13 Adding a bot to your app Open the Rohnson Link app and press the "+" icon and "Add device" on the home page. Then pair the robot according to the instructions in the app. The actual pairing process may vary slightly depending on app updates. Always follow the current instructions in the app.
- Page 14 Vacuuming and mopping RM-05 can vacuum, mop or combine both modes. You can find their settings in the mobile application. Before starting to use the robot, the station must have water in the clean water tank and a dust bag installed. The default mode for the first cleaning is Vacuuming and mopping at the same time.
- Page 15 Just press the start button and the robot will plan its cleaning route according to the saved map. The robot first vacuums and wipes the edges along the walls and then the interior of the room. During cleaning, the robot will determine by itself when to return to the station to wash the mops and add water to achieve the best possible result, or you can set the washing interval in the application.
-
Page 16: Child Lock
Do not disturb mode You can set the do not disturb mode yourself. This function is set in the mobile application. During the set period of Do Not Disturb mode, the robot will never perform any type of cleaning. Child lock How to activate the child lock: Press and hold the Start/Stop and Home buttons on the station together for 6 seconds. -
Page 17: Other Functions
Therefore, we recommend for cleaning on the floor where the robot does not have a station nearby to select only vacuuming programs, without mopping. - If you still want to use programs with wiping, follow this procedure: 1. Set the required mopping program in the application and set the longest mop soaking interval. 2. -
Page 18: Routine Maintenance
Routine maintenance To keep your robot performing at its best, we recommend regular maintenance at the intervals shown in the following table. Part reading interval replacement interval Front wheel clean as needed Waste container clean as needed Main brush every week every 6-12 months Side brush every month... -
Page 19: Side Brush
Remove the main brush, slide out its bearing and loosen the ends of the brush in the marked direction. Remove tangled hair and other debris from both ends of the brush. Put the main brush back into the robot. Replace the main brush cover. Use a cloth dampened in warm water to clean the main brush. - Page 20 Main wheels Wipe both wheels with a soft, dry cloth. Waste container Remove the upper magnetic cover of the robot and remove the waste container. Cleaning the waste container is necessary regularly, as the dirt is sucked into the dust bag Open the waste container and empty the dirt in the station.
- Page 21 Mops Rinse the mops Remove both mops from the holders. Mops are washed and and let them dry. dried after each cleaning. Place the mops back on their holders. A dirty mop can affect the quality of wiping, check their condition before use. Robot sensors Clean and wipe the sensors on the robot body with a dry, soft cloth..
- Page 22 Cleaning the cleaning dock Charging contacts Clean the cleaning container with the included cleaning brush and wipe Wipe the charging contacts of the container with a dry cloth. the station with a dry and soft cloth. Cleaning the filter of the tank for clean water Open the container cover and remove the suction part.
-
Page 23: Technical Parameters
Cleaning the base clip in the cleaning container Pull the base clip outside. Rinse it with clean water. Slide the cleaned base clip back into place. Technical parameters Model RM-05 Battery 14,4 V / 5200 mAh Li-ion Weight 3,92 kg Wi-Fi type 2,4 GHz Rated power... -
Page 24: Troubleshooting
Let the robot clean without the possibility of charging until it is unable to continue cleaning due to battery discharge. Turn off the robot. Unscrew the battery cover screws. Disconnect the battery connector and remove the battery. Warning! Before removing the battery, make sure it is completely discharged and the robot is not connected to the base. -
Page 25: Problem Solving
Problem solving Problem Solution The robot cannot be turned on 1. Dead battery. Place the robot on the base and fully charge it before use. 2. High or low temperature. Use the robot only in a temperature range of 0- 40 °C The robot cannot be charged 1. - Page 26 Check that there are no foreign objects or other obstacles in the suction holes. Low dirt suction effect, or non- Check that the dirt bag is not full. Clean the holes, replace the bag if standard noises during dirt suction necessary.
- Page 27 EU Declaration of Conformity Manufacturer: Xiamen Lynkbey Robot Ltd Company Address: No.8, Unit 301, No. 67 Chengyi North Street, Software Park III, Xiamen City, Fujian Province, China Model No.: RM-05 (D50 PRO) Description: Robotic Vacuum Cleaner Radio-related Software Version: Wi-Fi modular: 6223A-SRD We, Xiamen Lynkbey Robot Ltd Company, declare under our sole responsibility that the product described above is in conformity with the relevant Union Harmonization Legislations: RE Directive: 2014/53/EU;...
- Page 28 ■ Directive 2011/65/EU The object of the declaration described above is in conformity with the following relevant Union harmonization legislation(s): Radio Equipment 2014/53/EU Directive (RED) Low Voltage 2014/35/EU Directive (LVD) Electromagneti c Compatibility 2014/30/EU (EMC) Restriction of the use of certain 2015/863/EU hazardous...
Need help?
Do you have a question about the Mamba RM-05 and is the answer not in the manual?
Questions and answers