Subscribe to Our Youtube Channel
Related Manuals for Rohnson Mamba RM-04
Summary of Contents for Rohnson Mamba RM-04
- Page 1 ROBOTIC VACUUM CLEANER Mamba RM-04 Thanks, you for buying a Rohnson robot vacuum cleaner Scan with your phone or QR code to find out more about your machine...
- Page 2 Important Note: Before starting the application login process: Turn on the vacuum and press RECHARGE & PARTIAL CLEANING for 5 seconds until you hear'' Reset Wi-Fi. The WIFI LED is flashing blue for connection waiting and will remain solid blue when the process is complete In order to improve the product, we reserve the right to update the app and software.
- Page 3 aiting In order to improve the product, we reserve the right to update the app and software.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS READ THESE INSTRUCTIONS BEFORE USING THIS ROBOT VACUUM CLEAER. IT IS INTENDED FOR HOUSEHOLD USE ONLY. PLEASE KEEP ALERT WHEN USE THIS PRODUCT AND SAVE THESE INSTRUCTIONS. 1. This Robot can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Robot in a safe way and understand the hazards involved.
- Page 5 28. When not using the Docking Station for a long period of time, please unplug it. 29. The Robot must be used in accordance with the directions in this Instruction Manual. Rohnson cannot be held liable or responsible for any damages or injuries caused by improper use.
-
Page 6: Environment Friendly Disposal
SAVE THESE INSTRUCTIONS Environment friendly disposal This marking indicates that this product should not be disposed with other household wastes throughout the To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it. responsibly to promote the sustainable reuse of materιal resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. -
Page 7: Packing List
Packing List Will differ per different configurations Robot Vacuum Cleaner Self-empty Base Dust bag Side Brush READ THESE INSTRUCTIONS CAR EFU LLY B EF OR E USING TH E PR OD UCT, AND K EE P IT PR OPE R LY . Integrated Water Tank User Manual Cleaning Tool... -
Page 8: Parts Name
2. Parts Name Main Unit Start / Pause Bumper Partial Clean/Child Lock WIFI Indicator Recharge TOF Sensors LiDAR Sensor RESET Power Switch Rear View Anti-drop Sensors Side Brushes Universal Wheel Carpet Sensor Charging Contacts Roller Brush Release Button Driving Wheel Anti-drop Roller Brush Sensors... - Page 9 Self-empty Base Upper cover LED Indicator Dust Bag Deodorant Placement Dust Bag Buckle Visual air duct Charging Contacts Signal Transmission Area Dust Suction Inlet Air Duct Cover Screw Hole Filter Sponge Air outlet cover...
-
Page 10: Product Use
3. Product Use 3.1 Attentions Check and arrange the area to be cleaned to keep safe. Put furniture well and remove the obstacles. Remove or cover the low objects on the ground that may affect the robot working.. If there are carpet tassels, please put it under the carpet in advance. If the Robot is cleaning at the entrance of compound stairs and the edge of steps, please place protective fence to ensure its safety and smooth operation. -
Page 11: Robot Charging
3.2 Preparation Before using the product, please remove the protective strip and protective film. Remove the protective strip Install side brushes and lock screw 3.3 Robot Charging Put the self-empty base in ground against the wall. There should be no cliffs/stairs or objects in the area 1m to the left and right and 2m in front;... - Page 12 3.4 Install Integrated Water Tank and Dust Box 1. open the cover and fill with the 2. Close the lid of water inlet cover. water tank with water. (Make sure the lid close well and no raised parts.) 4. Press & hold the release key and 3.
- Page 13 Partial Clean Press partial cleaning button of Robot, Robot will clean a 1.5m*1.5m square area centered on itself. Recharge Press recharging button of Robot, Robot will return to Self-empty Base. Sleep and wake up Robot will sleep after full charged or without operated for 10 minutes. When Robot is not in self-empty base and sleep for more than 4 hours, it will automatically shut down.
- Page 14 1. Collecting dust 2. Robot will automatically return to self-empty base for charging and collecting dust after finishing cleaning. 3. Press Recharge button and Robot will return to self-empty base for charging and collecting dust. 4. During dust collection, press any button to stop. APP Operation and Functions Map management Before use, it is recommended to switch on Map Save Mode to get advanced...
- Page 15 Room Cleaning Robot will clean the Rooms selected in App. Tips: It’s necessary to switch on Map Save Mode in APP and save a map before Room Cleaning. Room Cleaning can only be used to customize the cleaning area and not to isolate hazards.
- Page 16 Restricted Area No-Go Zones, No-Mop Zones and virtual Wall are to prevent robot from access certain areas and rooms. By default, No-Mop Zones will be activated only when Mop holder is in place. Tips: 1.Restricted areas can be created on a saved or build-ing map. 2.Restricted Areas can only be used to customize cleaning area and not to isolate hazards.
- Page 17 5. Regular Care & Maintenance 5.1 Cleaning & Maintaining Integrated Water Tank & Dust Box 2. Take out the mop 1. Press & hold the release 3. Wash and dry the mops. holders and mops. key and pull the integrated water tank &...
- Page 18 5.2 Cleaning & Maintaining Roller Brush , Side Brush, Driving Wheel and Universal Wheel ■ Cleaning Roller Brush and Side Brush 1. Pull on the release 2. Lift the roller 3. Clean the roller 4. Clean the side tabs to unlock the brush with the brush to remove it.
- Page 19 5.3 Cleaning & Maintaining Charging Contacts, Anti-drop Sensors and TOF sensor. Clean TOF Clean the Charging Clean the Anti-drop Clean the Robot sensor contacts of Self- Sensors Charging contacts empty Base. Warm tips: Charging contacts, Anti-drop sensors and TOF sensors all contain sensitive electronic components.
-
Page 20: Troubleshooting
6. Troubleshooting During the use of the product, in case of the following conditions. It can be checked and solved independently by users. No Fault condition Likely cause What to do The router username Configure the router network and make sure that the "username"... - Page 21 Fault condition Likely cause What to do Charging the robot Low power Check whether the robot has abnormal The side brush & roller brush Robot is not alarm. It is recommended to clean and are entangled, and the dust working maintain the side brush, roller brush, dust box and filter material are box and filter material regularly...
- Page 22 No Fault condition Likely cause What to do The robot will try all kinds of ways to get The robot is entangled or rid of the trouble, if not, it is recom - obstructed by scattered wires, mended to help it manually dropping curtain cloth or The robot is in carpet tassels on the ground...
- Page 23 No Fault condition Likely cause What to do It will not follow scheduled cleaning in The robot is in Do Not Disturb Do Not Disturb mode, you can adjust mode the Do Not Disturb mode time in the Not breakpoint APP or clean at other times resume cleaning...
-
Page 24: Product Parameter
7. Product Parameter Robot Vacuum Cleaner RM-04 Model No 33*32.5*10CM Robot Size Robot Rated Input 1.2A Battery Li-ion battery 14.4V/5200mAh Charging Time 4-5 Hours Net Weight 3.35 KGS Self-empty Base Model C711 Size 32*20.5*26.5CM Dust Bag Power 1000W Output 1.2A Net Weight 3.60 KG This equipment should be operated with a minimum distance of 20cm between... - Page 25 EU Declaration of Conformity Manufacturer Name: Shenzhen Livirobo Electronic Co., Ltd. Address: Room 2901, Building B, Longhua Digital Innovation Center, Longhua District, Shenzhen, China Model No.: RM-04 Description: Robotic Vacuum Cleaner Radio-related Software Version: Wi-Fi modular: 6188S-UF We, Shenzhen Livirobo Electronic Co., Ltd., declare under our sole responsibility that the product described above is in conformity with the relevant Union Harmonization Legislations: RE Directive: 2014/53/EU RoHS: 2015/863/EU The following harmonized standards and/or other relevant standards have been applied:...
- Page 26 Radio Equipment 2014/53/EU Directive (RED) Low Voltage Directive 2014/35/EU (LVD) Electromagne 2014/30/EU Compatibility (EMC) Restriction of the use of certain 2015/863/EU hazardous substances (Rohs) The recognized third-party organization (Name: Shenzhen CTB Testing Technology Co., Ltd) performed the conformity assessment according to Annex II of the RE Directive and issued the EU- type examination certificate Signed for and on behalf of Shenzhen Livirobo Electronic Co., Ltd.
Need help?
Do you have a question about the Mamba RM-04 and is the answer not in the manual?
Questions and answers