Page 1
VACUUM CLEANER MODEL NO.: R-1218 INSTRUCTION MANUAL...
Page 2
IMPORTANT 1.Read this instruction booklet carefully. 2.Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate. 3.The appliance should be connected to a correctly-earthed 10 power socket. 4.Always remove the plug from the power socket when the appliance is not in use and before carrying out any cleaning or maintenance operations.
Page 3
Do not use the appliance on Do not use the appliance to Do not use the appliance to wet surfaces. vacuum lit up matches, to vacuum needles, cigarette ends or hot ash. Drawing –pins or Strings DESCRIPTION A. Housing D. Handle B.
Page 4
ASSEMBLING THE VACUUM CLEANER Assembly before operation 1、 itting the floor brush Insert the brush into the body. INSTRUCTION FOR USE 1, Loose the cable, insert the plug into the electrical outlet which the same as the nameplate; press the switch button, the vacuum cleaner begin working. 2.
Page 5
Using the cleaning accessories Clean the dust 1. Lift the cover and take out the dust cup. 2. Take out the HEPA filter from dust cup. 3. Clean off the dust inside the dust cup. Clean the HEPA filter 1. Take out the HEPA filter when it’s getting dirty. 2.
Page 6
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health, deriving form inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.
Need help?
Do you have a question about the R-1218 and is the answer not in the manual?
Questions and answers