Bowflex SelectTech 560 Troubleshooting Manual

3/11/24, 9:20 AM
SelectTech 560 Dumbbells: How can I turn the sound on/off?
Follow this troubleshooting guide to help resolve issues with the sound on your SelectTech 560 Dumbbells.
Some common complaints may include:
Sound isn't working
Want to turn the sound off
Follow these steps to troubleshoot the issue
Tools you may need:
AAA battery
Small Phillips head screwdriver
1. Press and hold the button on the sensor and watch for the sound icon to change
2.
Remove the sensor from the dumbbell handle using the small Phillips head screwdriver. Remove and re-insert the
battery in the sensor and retest [12056.B].
3.
Remove the sensor with the Phillips head screwdriver. Check that all 6 sensor contacts are even with each other. If any
contacts are bent (reference 1), gently bend them back into place [12056.C]. If any sensor contacts are missing or
broken, order a Sensor Handle Assembly
The red circle shows the sensor contacts on the handle. The rightmost contact is bent out of place and should be gently corrected.
4.
Once all parts are reassembled, perform a lock test
[12053.F]
Need to order replacement parts?
about:blank
SelectTech 560 Dumbbells:  How can I turn the sound on/off?
[12056.D].
(Reference 1)
here: SelectTech 560 Dumbbells: How do I perform a lock test?
ID: 12056.1
.
[12056.A]
1/2