Connecting The Signal Cable - Eizo FA-2090 User Manual

2-2. Connecting the signal cable

The FA-2090 has two display area on a display panel. To display both area, it is
required to plug signal cables to each Signal 1 or Signal 2 connector.
Default setting (Landscape)
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cables into each DVI-I connector at the rear of the
monitor and the other end of the cable into the video connector on
the PC.
After attaching the connectors, secure the connection with the screw-in fasteners.
[DVI-I Input (Signal 1 / Signal 2)]
Signal 2 Signal 1
Connecteur
DVI-I à l'arrière
To Signal 1 Connector
FD-C04 (enclosed)
To Signal 2 Connector
FD-C04 (enclosed)
Signal 1
Signal 2
Portrait Setting (Refer to p. 18)
Video Output Connector
DVI
Digital graphics board
Video Output Connector
DVI
Digital graphics board
2. CONNECTING UP
15