Eizo FORIS FS2331 Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. FORIS FS2331
  6. Manual

Eizo FORIS FS2331 Manual

Color lcd monitor
Hide thumbs Also See for FORIS FS2331:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Setup Manual
Important
Please read PRECAUTIONS, this User's Manual, and Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC or external device to using the
monitor.
• The latest User's Manual is available for download from our web site:
http://www.eizo.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FORIS FS2331 and is the answer not in the manual?

Questions and answers

Related Manuals for Eizo FORIS FS2331

Summary of Contents for Eizo FORIS FS2331

  • Page 1: Cover

    • Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC or external device to using the monitor. • The latest User’s Manual is available for download from our web site: http://www.eizo.com...
  • Page 2 EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.

  • Page 3: Notice For This Monitor

    Notice for this monitor This product is suited to creating documents, viewing multimedia content, and other general purposes. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual.
  • Page 4 Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or panel. Note • Optional ScreenCleaner is recommended for cleaning the panel surface. ● Panel • Clean the panel with a soft cloth such as cotton cloth or lens cleaning paper. •...

  • Page 5: Table Of Contents

    3-5. Locking Buttons “Key Lock” ..... 29  ● BasicoperationoftheSettingmenu ....11  ● 3-6. Setting the EIZO Logo Display “Logo” ..30 Functions ............12 3-7. Setting Language “Language” ....30 Chapter 2 Adjusting Screens ......13 3-8. Changing the HDCP authentication 2-1.
  • Page 6 Appendix .............. 49 Trademark ............... 49 License ..............49 ENERGY STAR ............49 TCO ................50 FCC Declaration of Conformity ......50 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor ......51 Hinweis zur Ergonomie : ........51 LIMITED WARRANTY ..........52 China Measures for RoHS Compliance in ChinaRoHS ............61 CONTENTS...

  • Page 7: Chapter 1 Introduction

    Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 23″ wide format LCD • Applicable to the resolution of 1920 × 1080. • Panel with a wide field of view adopted VA panel with 178º horizontal and vertical viewing angles.

  • Page 8: Controls And Functions

    1-2. Controls and Functions Monitor Menu Color Screen Sound PowerManager Monitor Settings Information Settingmenu 1 2 3 1. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction(page34). 2. Remote control Receivesthesignalfromtheremotecontrol. detector Switchesinputsignalsfordisplay(page36). button PC1(DVI)→PC2(D-SUB)→HDMI1→HDMI2 button Displaysthevolumeadjustmentmenutovolumeupordown. button Turnsthepoweronoroff. Indicatesthemonitor’soperationstatus. Blue: Operating Orange: Powersavingmode 6. Power indicator Poweroff OFF: Mainpoweroff...

  • Page 9: Before Using Remote Control

    Remote Control 1. OFF TIMER Setsthetimeuntilthemonitorpower-off. 2. DISPLAY Displaysthecurrentinputport. 3. SCREEN SIZE Changesthescreensize. 4. POWER Turnsthepoweronoroff. 5. INPUT SELECT Switchesinputsignalsfordisplay. PC1(DVI)→PC2(D-SUB) HDMI HDMI1→HDMI2 6. MUTE Mutessoundtemporarily. 7. VOLUME +/- Adjuststhevolume. 8. MENU Displays/ExitstheSettingmenu. 9. RETURN Returnstothepreviousmenuinmenuoperation. • Choosesandincreases/decreasesadjustmentsettings foradvancedadjustmentusingtheSettingmenu. • / :Displaysthebrightnessadjustmentmenu(page...

  • Page 10: Eizo Lcd Utility Disk

    1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt file on the disk for software startup procedures or file access procedures.

  • Page 11: Basic Operations And Functions

    1-4. Basic Operations and Functions ● Basic operation of the Setting menu Displaying the Setting menu 1. Press on the remote control. The Setting menu appears. Menu Color Screen Sound PowerManager Monitor Settings Information Adjusting/Setting 1. Choose a menu to adjust/set with , and then press .

  • Page 12: Functions

    HDMIsignalinput“Source””(page28) SoundLevel “3-3.Toadjustthesoundlevel “SoundLevel””(page29) PowerSave “4-1.SettingPowerSaving“Power PowerManager PowerSave Save””(page32) MonitorSettings DDC/CI “3-4.Enabling/DisablingDDC/CI communication “DDC/CI””(page29) KeyLock “3-5. Locking Buttons “Key Lock”” (page29) Logo “3-6.SettingtheEIZOLogoDisplay “Logo””(page30) PowerIndicator “4-2.SettingPowerIndicator“Power Indicator””(page33) Language “3-7.SettingLanguage“Language”” (page30) Reset “3-9.ResettingtheMonitortothe DefaultSettings”(page31) Information “7-3.DisplayingMonitorInformation “Information””(page42) *1 Theadjustment/settingsavailableonthe“Color”menudependontheselectedColormode.Theabove tableshowsthesubmenuswhentheUser1orUser2modeisselected. *2...

  • Page 13: Chapter 2 Adjusting Screens

    Chapter 2 Adjusting Screens 2-1. Compatible Resolutions/Formats The monitor supports the following resolutions and signal format. Analog Input (D-Sub) Vertical Scan Resolution Applicable Signals Dot Clock Frequency 640×480 VGA,VESA,CEA-861 upto75Hz 720×400 VGATEXT 70Hz 800×600 VESA upto75Hz 1024×768 VESA upto75Hz 148.5MHz 1280×720 CEA-861 60Hz...

  • Page 14: Setting The Resolution

    2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2.

  • Page 15: Adjusting Color

    2-3. Adjusting Color ● To select the display mode (Color Mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode Purpose User1 Selectoneoftheseusermodestodefineadesiredsetofparametersettings. User2 sRGB SuitableforcolormatchingwithsRGBcompatibleperipherals. Paper Producesaprintedpapereffectbydecreasingcontrastandcolortemperature. Game Suitablefordisplayinggameimages. Cinema Suitablefordisplayingmovie-likeimages. Displaysthecurrentmode. Color Mode User1 Procedure...

  • Page 16: To Perform Advanced Adjustments

    ● To perform advanced adjustments The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each mode. Attention • The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more after turning the monitor power on before starting adjustment.

  • Page 17: To Adjust Brightness "Brightness

    ● To adjust brightness “Brightness” The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press 2. Choose “Brightness” in the “Color” menu, and press The “Brightness”...

  • Page 18: To Adjust Contrast "Contrast

    ● To adjust contrast “Contrast” The brightness of the screen is adjusted by varying the video signal level. Adjustable range 0 to 100 Procedure 1. Choose “Color” in the Setting menu, and press 2. Choose “Contrast” in the “Color” menu, and press The “Contrast”...

  • Page 19: To Adjust Hue "Hue

    ● To adjust hue “Hue” This function allows you to adjust hue. Adjustable range -50 to 50 Procedure 1. Choose “Color” in the Setting menu, and press 2. Choose “Hue” in the “Color” menu, and press The “Hue” menu appears. 3.

  • Page 20: To Set Contrastenhancer "Contrastenhancer

    ● To set ContrastEnhancer “ContrastEnhancer” This function allows you to set whether to automatically adjust the contrast according to the darkness or brightness of a scene, for example. Procedure 1. Choose “Color” in the Setting menu, and press 2. Choose “Advanced Settings” in the “Color” menu, and press 3.

  • Page 21: To Adjust Gamma "Gamma

    ● To adjust gamma “Gamma” Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as “Gamma correction”.

  • Page 22: To Set Overdrive Intensity "Overdrive

    ● To set overdrive intensity “Overdrive” This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image lags by setting it to “Enhanced” when displaying animated images. Adjustable range Enhanced, Standard, Off Procedure 1.
  • Page 23 Prepare to use analog screen adjustment patterns. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. Note • For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file.
  • Page 24 Choose “Screen” from the Setting menu to perform advanced adjustments. Adjust the clock, phase and position, in this order. ● To eliminate vertical bars “Clock” Procedure 1. Choose “Clock” in the “Screen” menu, and press The “Clock” menu appears. 2. Adjust the clock with to eliminate vertical bars.
  • Page 25 ● To correct the screen position “Position” Note • Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display images correctly. The position adjustment is made to shift an image to the correct position. Procedure 1.

  • Page 26: Screen Size Changing

    Modify blurred characters or lines. ● To modify blurred characters/lines “Smoothing” When an image is displayed with a resolution other than recommended, the characters or lines of the displayed image may blur. Attention • Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.) Adjustable range 1 to 5 Procedure...

  • Page 27: Digital Input (Hdmi: Video Signal)

    ● Digital Input (HDMI: video signal) The screen size can be changed with the “Screen Size” function. Setting Function Screen Display Auto Themonitorautomaticallychangesthescreen sizeaccordingtotheaspectratioandresolution informationfromtheexternaldevice.Thiscanbeset onlyforHDMI(SDSignal)input. FullScreen Displaysanimageinfullscreen.Imagesare distortedinsomecasesbecausetheverticalrateis notequaltothehorizontalrate. Enlarged Displaysanimageinfullscreen.Insomecases, ablankhorizontalorverticalborderappearsto equalizetheverticalrateandthehorizontalrate. Letterbox DisplaysLetterboxof16:9infullscreen.Exceptfor Letterbox,theupperandlowerpartsoftheprojected imagearecut.ThiscanbesetonlyforHDMI(SD Signal)input. Normal Theimageisdisplayedwithoutscalingtheinput...

  • Page 28: Chapter 3 Setting Monitor

    Chapter 3 Setting Monitor 3-1. Adjusting Volume ● To turn the volume up/down This function allows you to adjust the volume. Adjustable range 0 to 30 Procedure 1. Press on the remote control. Note • Alternatively, you can use on the monitor for adjustment. (see “1-2.

  • Page 29: To Adjust The Sound Level "Sound Level

    3-3. To adjust the sound level “Sound Level” The input sound level can be adjusted. The volume difference may occur depending on the kinds of input signals, since the average sound level of the external device differs. Adjustable range -1 to 1 Procedure 1.

  • Page 30: Setting The Eizo Logo Display "Logo

    3-6. Setting the EIZO Logo Display “Logo” When the monitor is turned on, the EIZO logo appears on the screen. You can choose to display or not to display the EIZO logo. Procedure 1. Choose “Monitor Settings” in the Setting menu, and press 2.

  • Page 31: Resetting The Monitor To The Default Settings

    3-9. Resetting the Monitor to the Default Settings There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full Reset for resetting all settings to the defaults. Attention • After resetting, you cannot undo the operation. Note •...

  • Page 32: Chapter 4 Power Saving Functions

    Chapter 4 Power Saving Functions 4-1. Setting Power Saving “Power Save” ● Monitor This function allows you to specify whether to set the monitor into the power saving mode, depending on the state of an external device connected to it. When the monitor has shifted to the power saving mode, the images on the screen are not displayed.

  • Page 33: Audio Output

    Attention • When all the conditions below are met, the monitor does not change to the power saving mode even if “Power Save” is set to “Enable”: - “Power Save” for Sound is set to “Sound On” (“Audio Output” (page 33)) - In the mute state (“To mute the sound temporarily”...

  • Page 34: Enabling/Disabling Automatic Brightness Adjustment "Auto Ecoview

    4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView” The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function. Attention • Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function. Procedure 1.
  • Page 35 Canceling Off Timer 1. Press until “Disable” appears. Checking the remaining time 1. Press when the Off Timer is set. The time to turn off the power appears. Extending the time of the Off Timer 1. Press while the remaining time is displayed. Each time you press , the time is extended.

  • Page 36: Chapter 5 Connecting Cables

    Chapter 5 Connecting Cables 5-1. Connecting Multiple External Devices The product has multiple connections to external devices and allows you to switch to one of the connections for display. Attention • Do not use dual link cables. Connection examples HDMIconnector DVI-Dconnector D-Sub...

  • Page 37: Chapter 6 Troubleshooting

    Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No picture Problem Possible cause and remedy 1. No picture • Checkwhetherthepowercordisconnectedproperly. • Powerindicatordoesnotlight. • Turnoffthemainpower,andthenturnitonagaina fewminuteslater. • Turnthemainpowerswitchon. • Press ontheremotecontrol(or onthe monitor).
  • Page 38 Imaging problems (for both digital and analog) Problem Possible cause and remedy 3. The screen is too bright or too dark. • Use“Brightness”or“Contrast”intheSettingmenuto adjustit.(TheLCDmonitorbacklighthasalimitedlife span.Whenthescreenbecomesdarkorbeginsto flicker,contactyourlocaldealer.) • TurnontheAutoEcoViewfunction.Themonitor detectstheenvironmentalbrightnesstoadjustthe screenbrightnessautomatically. 4. Characters are blurred. • CheckwhetherthePCisconfiguredtomeetthe resolutionandverticalscanfrequencyrequirements ofthemonitor(see“2-1.CompatibleResolutions/ Formats”(page13)). • Use“Smoothing”intheSettingmenutoadjustit(see “Tomodifyblurredcharacters/lines“Smoothing””...
  • Page 39 Imaging problems (for analog only) Problem Possible cause and remedy 12. Display position is incorrect. • Use“Position”intheSettingmenutocorrectthe imageposition(see“Tocorrectthescreenposition “Position””(page25)). • Iftheproblempersists,usethegraphicsboard’sutility ifavailabletochangethedisplayposition. 13. Vertical bars appear on the screen or a • Use“Clock”intheSettingmenutoadjustit(see“To part of the image is flickering. eliminateverticalbars“Clock””(page24)). 14.
  • Page 40 Other problems Problem Possible cause and remedy 15. The “Smoothing” on the Setting menu • Youcannotchoose“smoothing”whenthescreenis “Screen” cannot be selected. displayedinthefollowingresolutionsorsettings.  - Theresolutionis1920×1080  - ScreenSizeis“Normal” 16. The auto adjustment function does not • Thisfunctiondoesnotworkduringdigitalsignalinput. work. • ThisfunctionisintendedforuseontheMacintosh andonAT-compatiblePCrunningWindows.Itdoes notworkproperlywhenanimageisdisplayedonly...

  • Page 41: Chapter 7 Reference

    An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm or stand, follow the instructions of their user’s manual.

  • Page 42: Attaching The Stand Base

    7-2. Attaching the Stand base The once removed the Stand base can be attached to the monitor again with the following procedures. Procedure Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. Attach the Stand base.

  • Page 43: Specifications

    7-4. Specifications LCDPanel Size 23.0-inch(580mm) Type TFTcolorLCD,VA Surfacetreatment Anti-GlareHardCoating Surfacehardness Viewingangles Viewingangles:Horizontal178°,vertical178°(CR≥10) DotPitch 0.2655mm ResponseTime Black-white-black:Approx.25ms Gray-to-gray:Approx.7ms(Overdrivesetting:Enhanced) Contrastratio 3000:1(whenContrastEnhancersettingis“On”10000:1) HorizontalScan Analog 31-81kHz Frequency Digital 31-68kHz HDMI 15-68kHz VerticalScan Analog 55-76Hz(non-interlace) Frequency Digital 59-61Hz(non-interlace) (VGATEXT:69-71Hz) HDMI 49-61Hz(VGATEXT:69-71Hz) Applicablevideosignalformats VGA/525i(480i)/525p(480p)/1125i(1080i)/750p(720p)/1125p(1080p):60Hz 625i(576i)/625p(576p)/1125i(1080i)/750p(720p)/1125p(1080p):50Hz Applicableaudiosignalformats 2chlinearPCM(32kHz/44.1kHz/48kHz) Resolution 1920Dots×1080Lines...
  • Page 44 Dimensions Mainunit 549mm(21.6inch)×403mm(15.9inch)×212mm(8.3inch) (Width)× Mainunit(withoutstand) 549mm(21.6inch)×393mm(15.5inch)×58mm(2.28inch) (Height)× (Depth) Mass Mainunit Approx.6.9kg(15.2lbs) Mainunit(withoutstand) Approx.6.1kg(13.4lbs) Movablerange Tilt:20°Up,-5°Down Environmental Temperature Operating:5°Cto35°C(41°Fto95°F) Conditions Storage:-20°Cto60°C(-4°Fto140°F) Humidity Operating:20%to80%R.H.(nocondensation) Storage:10%to90%R.H.(nocondensation) AirPressure Operating:700to1,060hPa Storage:200to1,060hPa Main Default Settings ColorMode D-Sub/DVI-Dinput:User1 HDMIinput:Game OffTimer Disable ScreenSize D-Sub/DVI-Dinput:Fullscreen HDMI(PCsignal/HDsignal)input:Fullscreen HDMI(SDsignal)input:Auto AutoEcoView Smoothing SoundLevel Sound-PowerSave SoundOff...
  • Page 45 Outside Dimensions Unit:mm(inch) 486(19.1) 171(6.7) 180(7.1) 549(21.6) TILT 224.5(8.8) 100(3.9) 224.5(8.8) 511.8(20.1) 18.6 (0.73) 214(8.4) (2.44) 212(8.3) 216(8.5) Accessories CleaningKit EIZO“ScreenCleaner” Signalcable(D-Submini15-pin) MD-C87 For the latest information about the accessories, refer to our web site. http://www.eizo.com Chapter7Reference...

  • Page 46: Glossary

    7-5. Glossary Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment.
  • Page 47 HDMI (High-Definition Multimedia Interface) HDMI is a digital interface standard, developed for consumer electrical appliance or AV device. This standard is issued on the basis of the DVI standard which is one of an interface specification for the connection between a PC and a monitor. The projected image, sound and control signal without compressed enable to be transmitted with one cable.

  • Page 48: Preset Timing

    VESA DPM (Video Electronics Standards Association - Display Power Management Signaling) VESA specifications achieve increased energy efficiency for computer monitors. This involves standardization of signals sent from the computer (graphics board). DPM defines the status of signals transmitted between the computer and monitor. 7-6.

  • Page 49: Appendix

    HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. EIZO, the EIZO Logo, FlexScan, FORIS, RadiForce, RadiCS, RadiNET, and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.

  • Page 50: Tco

    ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant toPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiateradio frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmful interferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurin aparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe interferencebyoneormoreofthefollowingmeasures. * Reorientorrelocatethereceivingantenna. * Increasetheseparationbetweentheequipmentandreceiver. * Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. * Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Changesormodifi  cationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe user’sauthoritytooperatetheequipment. Note Usetheattachedspecifi  edcablebeloworEIZOsignalcablewiththismonitorsoastokeepinterference withinthelimitsofaClassBdigitaldevice. - ACCord - ShieldedSignalCable(Enclosed) Canadian Notice ThisClassBdigitalapparatuscomplieswithCanadianICES-003. CetappareilnumériquedeleclasseBestcomformeàlanormeNMB-003duCanada. Appendix...

  • Page 51: Hinweise Zur Auswahl Des Richtigen Schwenkarms Für Ihren Monitor

    Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß...

  • Page 52: Limited Warranty

    (ii) 30,000 hours of its use of the Product (hereinafter referred to as the “Warranty Period”); provided, however,thattheWarrantyPeriodfortheLCDpaneloftheProductislimitedtothree(3)yearsfromthedateofpurchase of the Product. EIZO and Distributors shall bear no liability or obligation with regard to the Product in relation to the OriginalPurchaseroranythirdpartiesotherthanasprovidedunderthisWarranty....
  • Page 53 Die Dauer der Garantieleistung beträgt (i) fünf (5) Jahre ab dem Erstverkaufsdatum des Produkts oder (ii) 30.000 Betriebsstunden des Produkts (im Weiteren als „Garantiefrist“ bezeichnet); die Garantiefrist für das LCD-Panel des Produkts ist jedoch auf drei (3) Jahre ab dem Erstverkaufsdatum des Produkts beschränkt. EIZO und die Vertriebe übernehmenüberdenRahmendieserGarantiehinaushinsichtlichdesProduktskeinerleiHaftungoderVerpfl  ichtung...
  • Page 54 Produit (ci-après dénommée « Période de Garantie »), sous réserve, toutefois, que la Période de Garantie du panneau LCD du Produit est limitée à trois (3) ans à partir de la date d’achat du Produit.EIZO et ses DistributeursdéclinenttouteresponsabilitéouobligationconcernantceProduitfaceàl’Acheteurinitialouàtouteautre...
  • Page 55 (7)añosdesdequesedejedefabricarelmismo.Paralareparacióndelmonitor,EIZOylosdistribuidoresutilizarán repuestosquecumplanconnuestrosestándaresdecontroldecalidad. LaGarantíaesválidasóloenlospaísesyterritoriosdondeestánubicadoslosDistribuidores.LaGarantíanorestringe ningúnderecholegaldelCompradororiginal. A pesar de las estipulaciones de esta Garantía, EIZO y sus Distribuidores no tendrán obligación alguna bajo esta Garantíaenningunodeloscasosexpuestosacontinuación: (a) CualquierdefectodelProductocausadopordañoseneltransporte,modifi  cación,alteración,abuso,usoincorrecto, accidente, instalación incorrecta, desastre, mantenimiento incorrecto y/o reparación indebida realizada por un terceroquenoseaEIZOosusDistribuidores.
  • Page 56 EIZO e i suoi Distributori cesseranno di tenere o di conservare qualsiasi ricambio del Prodotto allo scadere di sette (7) anni dopo che la produzione di tali ricambi èstataterminata.Perlariparazionedelmonitor,EIZOei Distributori utilizzerannopartidiricambioconformiainostristandarddicontrollodellaqualità. La Garanzia è valida soltanto nei paesi dove ci sono i Distributori EIZO. La Garanzia non limita alcun diritto legale dell’Acquirenteoriginale. IndipendentementedaqualsiasialtracondizionediquestaGaranzia,EIZOeisuoiDistributorinonavrannoalcunobbligo...
  • Page 57 GarantiperiodenförProduktensLCD-panelärdockbegränsadtilltre(3)årfråndatumetförProduktensinköp.EIZOoch DistributörerskainteundernågravillkorhanågotannatansvaränvadsomangesidennagarantigällandeProdukteni relationtilldenUrsprungligeköparenellertredjepart. EIZOochDistributörerkommerattupphöramedlagerhållningavProduktensdelareftersju(7)årefterattproduktionen av dessa delar upphört. Nät skärmen repareras använder EIZO och distributörer reservdelar som uppfyller våra kvalitetsstandarder. Garantin är endast giltig i de länder där det finns Distributörer. Garantin begränsar inte några av den Ursprunglige köparenslagstadgaderättigheter. OavsettandravillkoridennagarantiskainteEIZODistributörerundernågravillkorhanågotansvarinågotavdefall...
  • Page 58 ΠΛΗΡΟΦΟΡΙΩΝ ΠΟΥΑΠΟΘΗΚΕΥΟΝΤΑΙ ΣΕ ΟΠΟΙΟΔΗΠΟΤΕ ΜΕΣΟ Ή ΟΠΟΙΟΔΗΠΟΤΕΑΛΛΟ ΜΕΡΟΣ ΣΕ ΟΠΟΙΟΔΗΠΟΤΕΠΡΟΪΟΝΠΟΥΕΠΙΣΤΡΕΦΕΤΑΙΣΤΗΝEIZOΉΣΕΔΙΑΝΟΜΕΑΓΙΑΕΠΙΣΚΕΥΗ. Η EIZO ΚΑΙ ΟΙΔΙΑΝΟΜΕΙΣΔΕΝ ΠΑΡΕΧΟΥΝ ΚΑΜΙΑ ΠΕΡΑΙΤΕΡΩ ΕΓΓΥΗΣΗ, ΡΗΤΗ Ή ΣΥΝΕΠΑΓΟΜΕΝΗ, ΟΣΟΝ ΑΦΟΡΑΤΟ ΠΡΟΪΟΝ ΚΑΙΤΗΝ ΠΟΙΟΤΗΤΑ,ΤΗΝΑΠΟΔΟΣΗ,ΤΗΝ ΕΜΠΟΡΕΥΣΙΜΟΤΗΤΑ ΉΤΗΝ ΚΑΤΑΛΛΗΛΟΤΗΤΑ ΤΟΥ ΓΙΑ ΟΠΟΙΑΔΗΠΟΤΕ ΣΥΓΚΕΚΡΙΜΕΝΗ ΧΡΗΣΗ. ΣΕ ΚΑΜΙΑ ΠΕΡΙΠΤΩΣΗ Η EIZO Ή ΟΙΔΙΑΝΟΜΕΙΣΔΕΝ...
  • Page 59 ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем“Первоначальный покупатель”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный в этом документе (называемый в дальнейшем “Продукт”), что EIZO или Дистрибуторы на свое усмотрение либо бесплатно отремонтируют, либо бесплатно заменят Продукт, если Первоначальный покупатель признает в пределах Гарантийного срока (определенного ниже), что Продукт неисправен или он поврежден процессе...
  • Page 60 本产品的任何部件停产七 (7) 年后 EIZO 和经销商将不再保留或保管任何这类部件 维修显示器时 EIZO 与经销商将使 用符合我方质量控制标准的替换零件 本保证书仅对于设有经销商的国家或地区有效 本保证书并不限定原买方的任何法律权利 无论本保证书的任何其他条款如何规定 对于任何下列情况之一 EIZO 和经销商将不承担本保证书规定责任 (a) 由于运输损害 改装 改动 滥用 误用 意外事故 错误安装 灾害 维护不善和 / 或由除 EIZO 和经销商以外的 第三方进行不适当的修理造成本产品的任何故障 (b) 由于可能发生的技术变更和 / 或调整造成本产品的任何不兼容性 (c) 由于诸如液晶显示屏 LCD 和 / 或背灯等消耗品部件的老化造成的任何显示性能低劣 如亮度变化 亮度均一性变化...

  • Page 61: China Measures For Rohs Compliance In Chinarohs

    China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI） ） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○...

Table of Contents