Loading And Changing Compact Discs; Playing A Disc; Video Output Selection - Samsung MAX-DN55 Instruction Manual

Loading and Changing Compact
Discs
GB
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled "Precautions When Using Compact Discs" on
page 42.
1
Switch the system on by pressing On/Standby.
2
Press the Open/Close(
Result: The compartment opens.
3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change but-
ton on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close(
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Disc 1
Disc 2
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
Disc 1
On/Standby
R
1
Demo
RDS
Timer
PTY Display /Clock
TUNER DVD/CD
Band
Mono/ST Memory CD Synchro
REC/Pause
12
) button on the front panel.
) button
Press...
DVD/CD ( ) or DISC 1
DISC 2
DISC 3
Disc 2 Disc 3
Disc Change
Disc Selection / Direct Play
5
4
Volume
+
5
–
DOLBY DIGITAL
TAPE AUX
Display Deck 1/2 REV. Mode
TAPE TAPE REC
Normal HI-Speed

Playing a Disc

Playback
1
Press the Open/Close(
2
Place a disc gently into the tray with the disc's label facing up.
3
Press the Play/Pause button or Open/Close(
disc tray.
On/Standby
R
Demo
RDS
Timer
PTY Display /Clock
TUNER
Band
Mono/ST Memory
REC/Pause
REC Lock
s

Video Output Selection

Press the Dolby Surround button in POWER OFF, then it is converted to
NTSC PAL
"
Example : Select PAL, if TV is for PAL.
When disk is set to NTSC in PAL, it doesn't operate.
2,5
On/Standby
R
Demo
RDS
Timer
PTY Display /Clock
TUNER
Band
Mono/ST Memory
REC/Pause
REC Lock
s
) button.
) button to close the
Disc 1 Disc 2 Disc 3
Disc Change
Disc Selection / Direct Play
Volume
+
3
–
DOLBY DIGITAL
DVD/CD TAPE AUX
CD Synchro Display Deck 1/2 REV. Mode
TAPE TAPE REC
Normal HI-Speed
Down Tuning Mode Up
SECAM
" and select the TYPE you want.
Volume
+
–
DOLBY DIGITAL
DVD/CD TAPE AUX
CD Synchro Display Deck 1/2 REV. Mode
TAPE TAPE REC
Normal HI-Speed
Down Tuning Mode Up
1,3