Tape Deck; Listening To A Cassette; Cd Synchro Record Feature - Samsung MAX-DN55 Instruction Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 42.
1
Switch the system on by pressing the On/Standby button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape fac-
ing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
If you insert a cassette in both decks, the system selects the
deck in which you inserted the second cassette.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indi-
cation is displayed.
7
To listen to... Press ...
Side A TAPE (
Side B TAPE (
Result: The cassette starts playing.
8
When the cassette is stopped, select one of the following functions
as required.
To...
Rewind the cassette
Fast-forward the cassette
On/Standby
R
1
Demo
RDS
Timer
PTY Display /Clock
TUNER DVD/CD
Band
Mono/ST Memory CD Synchro
REC/Pause
REC Lock
8
) DECK 1 and DECK 2
) DECK 2 only
Press ...
DOLBY DIGITAL
2,7
TAPE
Display Deck 1/2 REV. Mode
6
TAPE TAPE REC
Normal HI-Speed
Down Tuning Mode Up
8

CD Synchro Record Feature

You can record a compact disc on a cassette in two different
ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing On/Standby.
2
Insert a blank cassette in Deck 2.
3
Select the DVD/CD function by pressing DVD/CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD Synchro or press CD
Synchro directly to start recording at the beginning of the disc.
Result: REC is displayed and recording starts.
7
To stop...
Recording and playing the compact disc
The function of CD Synchro is operated in only CD.
On/Standby
R
1
Demo
RDS
Timer
PTY Display /Clock
TUNER DVD/CD
Band
Mono/ST Memory CD Synchro
REC/Pause
REC Lock
Press ...
3
DOLBY DIGITAL
TAPE
Display Deck 1/2 REV. Mode
TAPE TAPE REC
6
Normal HI-Speed
7
Down Tuning Mode Up
35
GB