Demo/Dimmer Function; Setting The Clock; Loading And Changing Compact Discs; To Replay The Cd/Mp3/Wma-Cd - Samsung MAX-A54U User Manual

DEMO/DIMMER function

ENG
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
1
Press the DEMO button.
Result: All functions available on the system appear on the front
panel display.
Each of these are explained in detail in this guide. Please refer to
the relevant section.
2 Press the DIMMER button.
Result: The Dimmer function is selected and the display darkens.
3
Press the DIMMER button once again to brighten the front panel dis-
play.
A display brightness control can only be performed while the
system power is on.
OPEN/ DISC
POWER
CLOSE SKIP
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
SLEEP MO/ST MEMORY
+10 DEMO DIMMER
1 2,3
SHUFFLE REP A-B REPEAT
P.SOUND P.BASS
USB/MP3-CD/CD
8

Setting the Clock

Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing STANDBY/ON.
2
Press TIMER/CLOCK twice.
Result: CLOCK is displayed.
3
Press ENTER/PRGM..
Result: The hour flashes.
4
To... Turn the MULTI JOG knob to the...
Increase the hours
Right
Decrease the hours
Left
5
When the correct hour is displayed, press ENTER/PRGM..
Result: The minutes flash.
6
To... Turn the MULTI JOG knob to the...
Increase the minutes
Right
Decrease the minutes
Left
7
When the correct time is displayed, press ENTER/PRGM..
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing TIMER/CLOCK once.
You can also use / buttons on the panel front or TUN-
ING / on the remote control to instead of MULTI JOG
knob in step 4, 6.
1
3,5,7
4,6
2
4,6
4,6
Loading and Changing Compact
Discs
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and
closing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled "Precautions When Using Compact Discs" on
page 22 .
1
Switch the system on by pressing STANDBY/ON.
2
Press the OPEN/CLOSE button on the front panel.
Result: The compartment opens.
3
Place one disc in the front slots of the carrousel, with the label on the
discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
4
If you wish to load another compact disc, press the DISC CHANGE
button on the front panel (or DISC SKIP on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the OPEN/CLOSE button again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play... Press...
Disc 1 MP3-CD /CD ( ) or Disc 1
Disc 2 Disc 2
Disc 3 Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio, usb
or auxiliary source function is selected, and when you
press the OPEN/CLOSE button, all of the other functions
will be changed to CD/MP3-CD function.
4
5
1
5

To replay the CD/MP3/WMA-CD

This is a player that enables the playback of audio CD, CD-R,
CD-RW and MP3/WMA-CD and does not possess the function
that saves MP3 files.
Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
At least more than one CD should be inserted for playbacks.
1
Press the STANDBY/ON button to switch on the power.
2
Press the CD/MP3-CD( ) of the main unit to select the CD function.
3
Insert more than one CD, or a MP3/WMA-CD .
4 Press the CD/MP3-CD( ) button of the main unit or the
of the remote control.
If there are more than one CD or an MP3/WMA-CD insert-
ed, replays are then processed in order.
Your CD Player will take a few moments to scan through
all the tracks recorded on a particular MP3/WMA-CD.
The English name of the song may be indicated on the display
only if directly downloaded from the PC or if the purchased
MP3/WMA-CD is sorted according to titles(directory). (Other
languages besides English may not be indicated.)
The English name of the track may not be indicated
depending on the characteristics of the MP3/WMA-CD.
<CD Playback> <During the MP3/WMA-CD playback>
Track Indicator
Track Indicator
Playtime Indicator
Playtime Indicator
5
Adjust the volume according to needs with the following procedures.
Press the VOLUME + or – button of the remote control.
The volume level can be adjust in 31 steps(VOL MIN,VOL 1-
VOL 29,and VOL MAX).
6
If it is desired to pause while the playback is processing, press the
CD/MP3-CD( ) button.
Press the CD/MP3-CD( ) button once again to playback again.
7
To stop playback, press the button.
A new disc may be inserted in the remaining two compartments
excluding the CD which is being played back. Press the Disc
Changer button to open the CD tray. The revolving part does
not turn during playbacks.
If there is not even one CD inserted in the CD tray, it is
indicated as "NO DISC".
If the CD Repeat function is not selected, 3 CDs are played back
which automatically stops.
The quality of MP3/WMA-CD playback may vary depending on
the condition of the disc containing the music files or the condi-
tion of the recorder with which the disc was created.
2,5 If different types of files or unnecessary folders are on the same
disc,you will have problems with playback.
1
2,4,6
5
7
MUTE
5
TUNING
VOLUME /ALBUM
5
ENG
button
9