Loading And Changing Compact Discs; Listening To A Compact Disc - Samsung MAX-VN52 Instruction Manual

Three-cd changer video-cd mini-compact system
Table of Contents

Advertisement

Loading and Changing Compact
Discs
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled "Precautions When Using Compact Discs" on
page 24.
1
Switch the system on by pressing On/Standby.
2
Press the Open/Close (
) button on the front panel.
Result: The compartment opens.
3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change but-
ton on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close (
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Disc 1
Disc 2
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
5
1
) button
Press...
VCD/CD (
) or DISC 1
DISC 2
DISC 3
4
2,5
5

Listening to a Compact Disc

When you have loaded at least one compact disc into the
player, you can start listening to it.
Always treat your compact discs with care; refer, if necessary, to
the section entitled "Precautions When Using Compact Discs" on
page 24.
1
Switch the system on by pressing On/Standby.
2
Select the CD function by pressing VCD/CD (
panel.
3
Load one or more discs.
4
Press VCD/CD (
) on the front panel or
If you have loaded more than one compact disc, they will
be played in turn.
5
Adjust the volume as required by:
Turning the Volume knob on the front panel
or
Pressing the Volume + or - buttons on the remote control
6
To pause temporarily during playback, press VCD/CD (
Press VCD/CD (
) again to continue disc playback.
7
Press
when you have finished.
When playing a disc, you can load new discs without
stopping the current one. To do so, open the compart-
ment by pressing Disc Change and load new discs in
the other two vacant slots (not the one containing the
disc that you are playing). You cannot rotate the car-
rousel during playback.
When no discs are loaded, the "NO DISC" indication is
displayed.
The CD player stops automatically after playing the
three discs, if the CD REPEAT function has not been
selected.
1
2,4,6
7
GB
) on the front
on the remote control.
).
5
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Max-7020vMax-vn57Max-vn55Max-7030vMax-7050v

Table of Contents