Volume - Samsung MAX-DN55 Instruction Manual

Setting up audio options
SPEAKER SETUP Function
1
Press the Setup button when in stop mode.
SETUP MENU
1 PLAYER MENU
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
RETURN
2
Use the UP/DOWN ( / ) button to select AUDIO OPTIONS.
Then press the Enter button.
AUDIO OPTIONS
1 DOLBY DIGITAL OUT
2 MPEG-2 DIGITAL OUT
3 DTS
4 DYNAMIC COMPRESSION
5 2X SCAN AUDIO
6 SPEAKER SETUP
RETURN
3
Use the UP/DOWN ( / ) button to select the SPEAKER SETUP,
SPEAKER SETUP
RETURN
4
then press the Enter button.
Use the UP/DOWN ( / ) button or LEFT/RIGHT (
to select the desired item, then press the Enter button.
Sleep Speaker Mode
Test Tone
Sound Edit
Display
1
2,3,4
Title
Set up
AUX Return
Operation method for speaker setting:
Movement mode : When the marks for
the right bottom of the screen, movement between the
boxes on the screen is possible.
Press the UP/DOWN (
( / ) button to move between the boxes.
To adjust the selected item, press the ENTER button to
enter into adjustment mode.
Adjustment mode : When the marks for
right bottom of the screen, adjustment for the respec-
tive box is possible. Press the UP/DOWN (
ton to adjust the speaker size, the volume, etc. To move to
the next box after completion of adjustment, press the
ENTER button to switch to movement mode.
How to make the SETUP MENU disappear or
return to menu screen during set up.
Press Return button.
(Cont'd)
ENGLISH
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
ENTER
BITSTREAM
BITSTREAM
ON
OFF
ON
ENTER
ENTER
/ ) button
Angle Audio
Book Mark
Step
Menu
Enter
Sub Title
are displayed at
ENTER
/ ) button or the LEFT/RIGHT
are displayed at the
ENTER
/ ) but-
1 2
SPEAKER SETUP
12
RETURN
11 10
1 This selects the size (large/small) of the left front speaker. The size of the
speaker picture changes. The right front speaker
same time. Volume adjustment is not possible for the front speakers.
Select "large" for the accessory speakers.
2 This sets the volume for the center speaker.
3
This selects the size (large, small or none) of the center speaker. Select
"small" for the accessory speaker.
4
This adjusts the delay time for the center speaker (delay time in regard to
the front speakers).
5
This selects the size (large/small) of the right front speaker. The right
front speaker follows the left front speaker. Operation is not required
when selection has been made for
6
This selects super woofer status.
7
This selects the size (large/small/none) of the right surround speaker. The
right left surround 11 also changes at the same time.
Select "small" for the accessory speakers.
8
This sets the volume for the right surround speaker.
9
This adjusts the delay time for the left and the right surround speaker
(delay time in regard to the front speakers). The left and the right speaker
change together.
10
This sets the volume level for the left surround speaker.
11
This selects large, small, or none for the left surround speaker. The right
surround speaker 7 follows this setting. Operation is not required when
selection has been made for 7 .
12
When TEST (test tone) has been selected, test noise is put out sequential-
ly from the speakers, starting with the left front speaker. Check that the
test noise can be heard from all speakers and that the same volume is
heard from all speakers.
If the volume is different for some speakers, return to the previous step
and adjust the volume for that speaker.
When [Delay time setting] is selected
The ideal listening position for 6-channel surround playback is the point at equal
distance from all speakers.
By setting the delay time for the center and surround speakers, this item real-
izes the ideal listening position virtually. (The center and surround speakers can
be set as if they are laid out on the dotted line circle shown below.)
[Center speaker setting]
Distance A
(A) = Df - Dc
Approx. 40cm
Approx. 80cm
• When Df = Dc or Df < Dc in
Approx. 120cm
the figure under "Delay time
Approx. 160cm
setting", set this value to 0 ms.
Approx. 200cm
[Surround speaker setting]
Distance B
(B) = Df - Dc
Approx. 120cm
Approx. 240cm
• When Df = Ds in the figure
Approx. 360cm
under "Delay time setting", set
Approx. 480cm
this value to 0 ms.
Approx. 600cm
3 4 5
6
ENTER
9 8 7
5 also changes at the
.
1
Setting
1 ms
2 ms
3 ms
4 ms
5 ms
Setting
3 ms
6 ms
9 ms
12 ms
15 ms
27
GB