Setting Up Audio Options - Samsung MAX-DN55 Instruction Manual

Setting up audio options

GB
1
Press the Setup button when in stop mode.
1 PLAYER MENU
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
RETURN
2
Use the UP/DOWN (
press the Enter button.
3
Use the UP/DOWN (
press the Enter button.
1 DOLBY DIGITAL OUT
2 MPEG-2 DIGITAL OUT
3 DTS
4 DYNAMIC COMPRESSION
5 2X SCAN AUDIO
6 SPEAKER SETUP
RETURN
DOLBY DIGITAL OUT/MPEG-2 DIGITAL OUT
A digital surround sound format that is recorded by Dolby Digital/MPEG-2
Audio. Select the suitable output signal type of DIGITAL AUDIO OUT-
PUT/MPET-2 DIGITAL OUT (Bitstream/PCM) during playback.
DTS
This program features discrete 5.1 channel sound-track and must be
played though DTS-capable equipment. When played through DTS
equipment, sound will be heard from all five system speakers and a sub-
woofer.
DYNAMIC COMPRESSION
Compresses the dynamic range (quietest to loudest sound) of a disc's
soundtrack. This function is disc-dependent, and may not work with all
DVDs.
2 x SCAN AUDIO
Turns audio off or on when a disc is in 2 x playback mode.
SPEAKER SETUP
Adjusts the speaker size, the sound balance between speakers, etc.
4
Use the UP/DOWN (
press the Enter button.
DOLBY DIGITAL OUTPUT
PCM
Converts to PCM(2CH) of 48kHz/16Bit. Select PCM when using the
Analog Audio Outputs.
BITSTREAM
Convert to Dolby Digital BITSTREAM (5.1CH). Select BITSTEREAM
when using the Digital Audio Output.
MPEG-2 DIGITAL OUT
PCM
Converts to PCM (2CH) of 48KHz/16Bit. Select PCM when using the
Analog Audio Outputs.
BITSTREAM
Convert to MPEG-2 Audio BITSTREAM. Select BITSTEREAM when
using the Digital Audio Output.
Be sure to select the correct Digital Output or no audio will be
heard.
26
SETUP MENU
ENGLISH
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
ENTER
/ ) button to select AUDIO OPTIONS. Then
/ ) button to select the desired item. Then
AUDIO OPTIONS
BITSTREAM
BITSTREAM
OFF
ON
OFF
ENTER
/ ) button to select the desired item. Then
DTS
ON
Outputs DTS BITSTREAM via only digital output. Select DTS when
connecting to a DTS DECODER.
OFF
Doesn't output digital signal.
DYNAMIC COMPRESSION
ON
To select dynamic compression.
OFF
To select the standard range.
2X SCAN AUDIO
ON
Turn 2 x audio on.
OFF
Turn 2 x audio off.
Though 2 x SCAN AUDIO is ON in SETUP MENU, no sound will be heard
on discs which are recorded with LPCM or DTS.
Tuning
Mode
Volume
—
Timer On/Off
Sleep Speaker Mode
Test Tone
Sound Edit
Display
1
2,3,4
Title
Set up
AUX Return
Zoom
Angle Audio
Book Mark
Step
Menu
Enter
Sub Title