Hanna Instruments HI6000180 Instruction Manual

6. Start stirring.
Front LED light turns blue while stirring.
Drag the slider along the control bar to change the
speed of the stirrer.
Note: Alternatively, use the speed knob to change the
stirring speed.
Allow sufficient time for the mixing operation to attain
uniform rotational flow.
When no further stirring is required, disconnect the stirrer.
Accessories
Magnetic micro stir bar
HI731319
25 x 7 mm (1 x 0.3") (10 pcs.)
Hanna Instruments reserves the right to modify the design,
construction, or appearance of its products without advance notice.
All rights are reserved. Reproduction in whole or in part is prohibited
without the copyright owner's written consent, Hanna Instruments
Inc., Woonsocket, Rhode Island, 02895, USA.
Certification
®
All Hanna instruments conform to the CE European
Directives and UK Standards.
Disposal of Electrical & Electronic Equipment. The
product should not be treated as household waste.
Instead, hand it over to the appropriate collection point for
the recycling of electrical and electronic equipment, which
will conserve natural resources.
Ensuring proper product disposal prevents potential
negative consequences for the environment and human
health. For more information, contact your city, your local
household waste disposal service, or the place of purchase.
Recommendations for Users
Before using this stirrer, make sure that it is entirely suitable
for your specific application and for the environment in
which it is used. For your and the stirrer's safety do not use
or store the stirrer in hazardous environments.
Warranty
HI6000180 is warranted for a period of one year
against defects in workmanship and materials when
used for its intended purpose and maintained according
to instructions. This warranty is limited to repair or
replacement free of charge. Damage due to accidents,
misuse, tampering, or lack of prescribed maintenance is
not covered. If service is required, contact your local Hanna
®
Instruments office. If under warranty, report the model
number, date of purchase, serial number and the nature of
the problem. If the repair is not covered by the warranty,
you will be notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments
office, first obtain a Returned Goods Authorization (RGA)
number from the Technical Service department and then
send it with shipping costs prepaid. When shipping any
instrument, make sure it is properly packaged for complete
protection.
INSTRUCTION MANUAL
Magnetic Mini-Stirrer
IST6000180 06/24
HI6000180