General Features; Connecting Your "Stb - Samsung DSB-B350S Instructions For Use Manual

GENERAL FEATURES

1. USER SECTION
4000 PROGRAMMABLE CHANNELS
ADVANCED ELECTRONIC PROGRAM GUIDE
7 SEGMENT LED DISPLAY
DISEQC 1.0 & 1.2 SUPPORTED
SCART OUTPUT & RCA OUTPUT
AUTOMATIC AND MANUAL SCAN FACILITY
CHANNEL ORGANISING(PROGRAMMABLE)
4 MULTI LANGUAGES SUPPORTED FOR OSD
SCPC/MCPC RECEPTION
SUPPORTED SCANNING FTA AND ALL CHANNELS BY
SOFTWARE SELECTION
INDIVIDUAL CHANNEL LOCK FACILITY
VOLUME LEVEL SAVING AFTER RESTARTING
FAVORITE CHANNEL LIST - UP TO 8 LISTS
CHANNEL DATA EXTRACT AND DOWNLOAD FROM AND TO
THE BOX
EDIT CHANNELS (RENAME, MOVE, DELETE, LOCK)
ADD SATELLITE FUNCTION.
TIMER FUNCTION (3 EVENTS)
SORTING (ALPHABETICALLY, SATELLITE)
MENU APPEARANCE (TRANSPARENCY)
RESERVING FUNCTION IN EPG
AS DEFAULT AUTOMATIC TIME OFFSET RECEPTION FROM DVB
PSI/SI SHALL BE AVAILABLE. USER MAY SET A DIFFERENT
OFFSET VALUE CRYPTOWORKS
SATELLITE SIGNAL LEVEL INDICATION
2. TUNER SECTION
950~2150 MHz WIDE BAND TUNER
2~45MS/s SYMBOL RATE
SUPPORTING DiSEqC 1.0 & 1.2 VERSION
13V/18V SWITCHING
22KHz CONTINUOUS TONE CONTROL
3. VIDEO SECTION
DVB-S COMPONANT
1~15 Mb/s DATA RATE
SUPPORTS ASPECT RATIO 4:3(NORMAL) AND 16:9
(WIDE SCREEN)
MODULATOR OUTPUT
4. AUDIO SECTION
MPEG I AUDIO LAYER I & II
MONO, DUAL, STEREO AUDIO MODE
32, 44.1 AND 48 kHz SAMPLING FREQUENCIES
VOLUME CONTROL AND MUTE FUNCTION THROUGH,
REMOTE CONTROL UNIT
SPDIF DIGITAL AUDIO OUTPUT
GB-4 D I G I T A L
1. LOCATION OF THE RECEIVER
Your STB should be placed under proper ventilation.
Don't put in completely enclosed cabinet that will restrict the flow of air,
resulting in overheating.
The location should be safeguarded from direct sunlight, excess moisture,
ugh handling or household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
2. CONNECTING THE RECEIVER WITH DISH SYSTEM
Connect the coaxial cable to "DISH INPUT" terminal marked at the rear of the receiver.
All cable connectors should be finger tightened ; do not use any kind of wrench on the
cable over connectors. The cable should be 75Ω impedance coaxial twisted at the end
with a "F" type connector.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use SCART Cable.
In the case of connecting your TV through SCART cable, connect the SCART
connector marked TV to the respective SCART port on the TV.
4. CONNECTING YOUR ANALOG RECEIVER
To facilitate the user using analog receiver to view analog channels, STB has been
provided with a loop through terminal marked as "LOOP".
Connect the coaxial cable from this terminal to the IF input terminal of your analog
receiver. Now by keeping the STB in standby, you will be able to tune and view analog
channels from your analog receiver.
5. CONNECTING YOUR VCR
To connect a VCR or DVD player, the STB has been provided with SCART at the rear
marked "External Audio RCA".
Using a SCART connector, the VCR or DVD player can be connected to the receiver.
N N o o t t e e : This is only supported by power on mode.(Not supported standby mode)
6. CONNECTING DIGITAL AUDIO SYSTEM
Connect a fiber optics cable between DIGITAL AUDIO OUT on the receiver and Optical
SPDIF on the Digital Audio System.
S A T E L L I T E R E C E

CONNECTING YOUR "STB"

I V E R GB-5